Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
A shielded 26 AWG SATA cable with one right-angle and one straight locking connector for tight builds
- Cable length3.28 ft (1m)
- Connector count2
- Connector genderMale to Male
- Product typeSATA II
- Product colorRed
- Overall length3.28 ft (1 m)
- Right-angle plus straight ends simplify tight routing
- Shielded 26 AWG conductors support reliable SATA II data transfer
- Narrow red cable improves airflow inside the chassis
- Locking latch on each male connector prevents accidental disconnects
- Hot-swap capability allows drive changes without powering down
Compact 1 m SATA II link
The Nippon Labs SATA-1-MINI is a 3.28 ft red cable that connects a high-speed Serial ATA device to a Serial ATA controller. It uses two shielded 26 AWG conductors with a right-angle plug on one end and a straight plug on the other. Both male connectors feature a locking latch for secure retention. The narrow profile simplifies cable routing and improves airflow inside the chassis.
Right-angle to straight orientation
The single specification that decides fit is the mixed connector geometry: one right-angle and one straight SATA plug. This combination suits drives mounted in tight corners where a straight plug would foul adjacent components, while the controller side keeps a conventional straight entry. Hot-swap capability is supported and the assembly is RoHS compliant.
Builders routing in confined drive bays
This cable suits builders who need a short, flexible link between a drive in a cramped bay and a motherboard or controller port. It is not for installations that require two straight connectors, two right-angle connectors, or a longer reach than 1 metre. Buyers needing a different connector pairing or extra length should look at other cable configurations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA-1-MINI |
| Product type | SATA II |
| Product color | Red |
| Ports & slots | |
| Connector count | 2 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.28 ft (1 m) |
| Cable length | 3.28 ft (1m) |
| Shipping weight | 0.02 kg |
| Package size | 141 × 88 × 36 mm |
Questions about this item
What does the SATA II rating mean when the cable is installed in a system?
The cable supports the SATA II interface, which caps data transfer at 3 Gbit/s between a Serial ATA device and its controller.
Which interface standard does this cable use and what speed does it limit in practice?
It uses the SATA II standard, limiting the link to 3 Gbit/s even if the drive or controller is capable of a faster SATA revision.
What physical space and connector orientation does this cable need to fit?
One end has a right-angle plug and the other a straight plug, both male, so the drive and controller must accept standard 7-pin SATA connectors with that orientation.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





