Nippon Labs SATA-COMBO-1.5BK 1.5 ft SATA power combination cable
Combines SATA data and power in a 1.5 ft black cable supporting 300 MB/sec transfer rates
- Rated speedFast data transfer rate of up to 300 MB/Sec
- Cable length1.5 ft (0.46 m)
- Product typeSATA
- Product colorBlack
- Overall length1.5 ft (0.46 m)
- Key featuresEasy migration to Sata Connect sata devices Quickly connect
- Fast data transfers up to 300 MB/Sec for quick file access
- 5 ft length keeps internal routing tidy and signal paths short
- Combines SATA data and power in one cable to reduce connector clutter
- Meets current SATA specifications for reliable drive performance
- RoHS and UL compliant materials meet environmental and safety standards
SATA power combination cable
This 1.5 ft cable combines a SATA data link and a power feed in a single black assembly. It lets you connect a Serial ATA hard drive to an internal power source without running separate leads. The design meets current SATA specifications and is both RoHS and UL compliant. Builders who need a tidy internal connection for a single drive will find it straightforward.
300 MB/Sec data rate and 1.5 ft length
The cable supports a fast data transfer rate of up to 300 MB/Sec, which handles typical mechanical hard drives and SATA SSDs without bottleneck. The fixed 1.5 ft reach suits compact chassis or drive bays close to the motherboard and power supply. Longer runs or external enclosures will require a different cable, as this length offers no slack for routing around large coolers or across full-tower cases.
Passive thermals and no extra power draw
As a passive copper cable it adds no active heat, no fan noise and draws no power beyond the drive itself. The short length keeps resistive losses negligible, so the drive receives the full voltage the supply provides. Installers who need active signal boosting or shielded runs for electrically noisy environments should look elsewhere, because this cable provides only the standard conductors specified by SATA.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA-COMBO-1.5BK |
| Product type | SATA |
| Product color | Black |
| Performance | |
| Rated speed | Fast data transfer rate of up to 300 MB/Sec |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
| Shipping weight | 0.05 kg |
| Package size | 173 × 86 × 28 mm |
Questions about this item
Will the 1.5 ft SATA and power combination cable reach from a bottom-mounted PSU to a lower drive bay in a mid-tower case?
The cable is 1.5 ft long; measure your specific routing path to confirm it spans the distance between your power supply and the drive bay.
How can I verify the 300 MB/Sec data transfer rate is achieved after connecting the cable?
Run a disk benchmark tool on the connected SATA drive and compare the sequential read and write results against the 300 MB/Sec specification.
Does the SATA-COMBO-1.5BK package include both the data and power connectors, or must I buy a separate SATA data cable?
The combination cable integrates both the SATA data connector and the SATA power connector in one assembly, so no separate data cable is required.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





