Nippon Labs SATA3-1.5FT-90R 1.5 ft SATA III right-angle cable Red
A 1.5 ft red SATA cable with a 90-degree right-angle connector for tight spaces, supporting 6 Gb/s speeds
- Cable length1.5 ft (0.46 m)
- Connector count2
- Connector detailsConnector A: 90 degree-right angle connector Connector A: SA
- Product typeSATA III
- Product colorRed
- Overall length1.5 ft (0.46 m)
- Right-angle connector fits tight drive bays
- 5 ft length reduces cable clutter inside cases
- SATA 6 Gb/s support keeps SSD and HDD speeds intact
- Backward compatible with 3 Gb/s and 1.5 Gb/s devices
- Red rubber sleeving aids quick cable identification
Short internal cable for tight builds
This 1.5 ft SATA III cable uses a 90 degree right-angle connector on one end and a straight connector on the other. The red sleeving is durable, flexible rubber that bends and twists without kinking. It supports 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices. Hot-plug capability allows drive changes without powering down.
Replaces long straight cables in cramped cases
Builders upgrading from standard straight-to-straight cables gain clearance behind drives and near motherboard headers. The right-angle end tucks close to the drive PCB, reducing strain on the port when the side panel closes. The jump is worth it when cable routing space is under 15 cm or when airflow is blocked by excess slack.
Handles one drive with minimal slack
The 1.5 ft length connects a single SSD or HDD to a nearby motherboard port with no coils to manage. It runs out of reach for bottom-mounted drive bays in full-tower chassis or for routing behind a motherboard tray. Buyers needing longer runs or multiple drive connections should select a different length.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA3-1.5 ft-90R |
| Product type | SATA III |
| Product color | Red |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Connector A: 90 degree-right angle connector Connector A: SATA3 Straight |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
| Shipping weight | 0.02 kg |
| Package size | 164 × 84 × 17 mm |
Questions about this item
Will the 90-degree connector clear a drive bay with 15 mm of space behind the drive?
The right-angle plug adds roughly 15 mm of depth from the drive's SATA port, so measure your clearance against that figure.
Do I need to latch the straight connector to the motherboard before routing the cable?
Yes — seat the straight SATA III plug firmly until the metal clip clicks, then route the flexible red sleeve to the drive; reversing the order often bends the cable sharply at the right-angle end.
How often should I replace a SATA III cable that stays permanently installed?
RoHS-compliant rubber sleeving resists embrittlement, so replacement is only needed if the latch breaks or the cable is repeatedly flexed near the 90-degree bend.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





