Nippon Labs SATA3-1.5FT-BK 1.5 ft SATA III cable
A 1.5 ft SATA III cable supporting 6 Gb/s speeds with backward compatibility and flexible rubber sleeving
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeSATA III
- Product colorBlack
- Overall length1.5 ft (0.46 m)
- Key featuresSupported SATA 6 Gb/s technology Backward compatible with 3
- SATA 6 Gb/s throughput for fast data transfer
- Backward compatible with 3 Gb/s and 1.5 Gb/s devices
- Flexible rubber sleeving bends easily in tight cases
- Hot-plug support lets you swap drives without shutdown
- 5 ft length keeps cable runs short and tidy
1.5 ft SATA III cable
This 1.5 ft SATA III cable links a single drive to a host port inside a desktop or server. The black sleeved assembly carries two male connectors and supports the 6 Gb/s signalling rate while remaining backward compatible with 3 Gb/s and 1.5 Gb/s devices. RoHS compliance confirms the materials meet restricted-substance limits. The short length suits compact chassis or tight routing paths where excess cable would block airflow.
Replaces longer or stiff SATA leads
Swapping a bulky ribbon or an over-length cable for this 1.5 ft model frees space behind the motherboard tray and reduces bend stress on drive ports. The flexible rubber sleeving tolerates repeated re-routing during drive swaps or chassis upgrades. The upgrade is worth it when cable clutter impedes cooling or when a shorter run eliminates signal degradation from unnecessary length.
Sustained transfer behaviour
The durable rubber jacket resists kinking during continuous vibration from spinning drives, maintaining consistent contact through thermal cycles. Hot-plug capability allows drives to be connected or disconnected without system shutdown, supporting maintenance workflows that demand uptime. The 6 Gb/s link sustains full throughput for sequential workloads without the throttling seen on worn or poorly shielded cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA3-1.5 ft-BK |
| Product type | SATA III |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
| Shipping weight | 0.02 kg |
| Package size | 169 × 94 × 25 mm |
Questions about this item
What clearance does the 1.5 ft SATA III cable need behind a drive bay?
The 1.5 ft length requires enough depth for the straight male connectors plus a gentle bend radius; the flexible rubber sleeving tolerates tight routing but should not be kinked.
How is the cable connected, and what step is often missed?
Align the L‑shaped key on each male SATA plug with the port notch, press straight in until the metal shell seats fully, then verify the latch clicks — partial insertion causes link errors.
When should the cable be replaced?
Replace it if the rubber sleeving cracks, the latch tabs break, or intermittent detection appears after ruling out drive and port faults.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





