Nippon Labs SATA3L0.8FT-90/180BK SATA cable 9.6 in 90 to 180 degree
A 9.6 in SATA III cable with a 90 degree to 180 degree connector layout and latching ends for 6 Gb/s drives
- Cable length9.6 in (24.4 cm)
- Connector count2
- Connector details90 degree to 180 degree
- Product typeSATA III
- Product colorBlack
- Overall length0.8 ft (0.24 m)
- SATA 6 Gb/s speed with backward compatibility to 1.5 and 3 Gb/s
- 6 inch length fits tight chassis and reduces cable clutter
- 90 to 180 degree connectors simplify routing behind drives and motherboards
- Latching design secures connection against vibration and accidental disconnects
- Flexible rubber sleeving bends and twists without damaging internal wires
Cable purpose and fit
The Nippon Labs SATA3L0.8FT-90/180BK is a SATA III cable built for tight internal routing where a straight connector would block adjacent ports or press against a drive cage. Its short 9.6 in length suits builders who need a direct link between a motherboard header and a nearby SSD or hard drive without excess slack.
Build quality and daily handling
Durable flexible rubber sleeving protects the conductors while allowing the cable to be bent and twisted during installation. One end terminates in a 90 degree right-angle plug and the other in a 180 degree straight plug, both featuring latching mechanisms that hold firm under vibration yet release cleanly when devices are swapped.
Upgrade context and limits
This cable replaces older SATA leads that only support 1.5 Gb/s or 3 Gb/s, enabling the full 6 Gb/s throughput of modern solid-state drives. It is not suited for runs longer than 9.6 in, for external eSATA ports, or for builders who require angled connectors at both ends.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA3L0.8 ft-90/180BK |
| Product type | SATA III |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 90 degree to 180 degree |
| Size & build | |
| Overall length | 0.8 ft (0.24 m) |
| Cable length | 9.6 in (24.4 cm) |
| Shipping weight | 0.01 kg |
| Package size | 178 × 75 × 25 mm |
Questions about this item
What speed does the SATA III interface on this cable actually deliver?
The cable supports SATA 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices.
Will the 90-degree and 180-degree connectors fit my drive and motherboard ports?
One end is a 90-degree right-angle plug and the other is a straight 180-degree plug, both standard SATA male connectors.
How do I install the latching connectors without damaging the port?
Align the L-shaped key on each connector, push straight in until the metal latch clicks, and press the latch release before pulling it out.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





