NShi USB 2.0 to 2.5" SATA 22-pin cable adapter 48cm
Connects a 2.5" SATA drive to USB with a Y-cable for power and a 22-pin connector
- Cable length1.8 in (4.57 cm)
- Connector count1
- Connector genderMale to Male
- Product typeCable Connectors
- Product colorRed
- Overall length< 1 in
- Connect 2.5" SATA SSD or HDD via USB 2.0 for quick data access
- Two USB 2.0 type-A male plugs deliver power to 7200rpm drives without external adapter
- LED shows power in red and read/write activity in blue for instant status
- Works with Windows 98SE through Windows 8 plus Linux and Mac OS with no driver needed
- 48cm flat cable keeps desk tidy while supporting SATA 2.0 and 1.0 speeds
USB 2.0 to 2.5" SATA adapter
This cable adapter connects a 2.5-inch 7+15-pin SATA hard drive or SSD to a computer through two USB 2.0 type-A male connectors in a Y-configuration. It draws power directly from the USB bus, requiring no external supply, and includes an LED indicator showing power and read/write activity. The 48cm flat cable supports plug-and-play and hot-swapping across Windows, Linux and macOS.
Suits quick drive access without a dock
It is designed for users who need to test, recover data from or temporarily mount a 2.5" SATA drive using only standard USB ports. The Y-cable provides extra current for drives up to 7200 rpm when a single port cannot supply enough power. Builders who require a permanent internal connection, faster transfer speeds than USB 2.0 allows, or support for 3.5-inch drives should look elsewhere.
Transfer rate limited to USB 2.0 480 Mbps
The interface tops out at 480 megabits per second, which is the decisive figure for deciding whether this adapter meets a workload's speed requirements. It complies with Serial ATA revision 2.0 and 1.0, so it works with SATA I and SATA II drives, but the USB 2.0 link remains the bottleneck. If the task demands higher sustained throughput, this cable will not deliver it.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | Does Not Apply |
| Product type | Cable Connectors |
| Product color | Red |
| Ports & slots | |
| Connector count | 1 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | < 1 in |
| Cable length | 1.8 in (4.57 cm) |
Questions about this item
How do I connect the two USB-A plugs on the Y-cable to power a 2.5" SATA drive?
Insert both USB-A connectors into separate USB ports on the same computer; the extra plug supplies the additional 5 V current needed for 7200 rpm drives.
Will the LED indicator or the USB connectors need replacement after extended use?
The cable has no user-serviceable parts; the red power and blue activity LEDs are sealed in the housing and the USB-A and 22-pin SATA connectors are rated for standard insertion cycles.
What throughput ceiling appears first when copying large files continuously?
The USB 2.0 interface limits sustained transfer to 480 Mbps, so the bus saturates before the SATA 2.0 link or the drive’s own speed.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





