Shenzhen Aimilai Technology Co.Ltd. M.2 NVMe to PCIe x4 Adapter with Heatsink Gold Aluminum Black
- Gold
- Aluminum, Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts one Molex connector into four 3-pin fan headers with a 30 cm sleeved black cable
This Phobya 81104 cable converts a single 4-pin Molex power connector into three 3-pin fan headers, letting you run multiple chipset or memory fans from one supply rail. The 30 cm sleeved loom keeps wiring tidy inside compact builds. A white marking on one branch identifies the RPM signal wire for monitoring. Builders who need more than three additional fan headers cannot use this adapter alone.
Connect the male Molex plug to any free PSU lead, then attach up to three 3-pin fans to the female headers. The loop-through Molex female on the input side preserves the original connector for another device. Black mesh sleeving and heatshrink ends resist snagging during routing. Installers must ensure the 12 V Molex rail can supply the combined current draw of all attached fans.
The adapter passes the Molex 12 V line directly to every 3-pin header, so all connected fans run at full voltage continuously. PWM or voltage-based fan curves are not possible because the 3-pin headers lack a fourth control wire. The single RPM signal wire only reports speed from one fan, leaving the others unmonitored. Systems requiring per-fan speed regulation need a powered fan controller instead.
Measured against everything we stock in RAM & Chipset Heatsinks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Phobya |
| Model name | 81104 |
| Fan color | Black |
Check that each connected fan spins up and reports an RPM reading in your BIOS or monitoring software; the white marking on one split cable indicates which lead carries the speed signal back to the motherboard header.
The cable supplies one 4-pin Molex male plug and three 3-pin fan headers plus a loop-through Molex female; you must provide the 4-pin Molex power lead from your PSU and up to four 3-pin fans yourself.
Model 81104 is the single version offered; it provides a 30 cm black-sleeved assembly with 12 V pass-through, so no alternative length or colour options exist to select from.
More in RAM & Chipset Heatsinks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?