Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A flexible 15×15 mm thermal pad rated at 5 W/mK that fills gaps on coolers and components
This thermal pad is designed to fill gaps between heat-generating components and coolers. Its flexible, low-hardness structure conforms to uneven surfaces at low contact pressure. The pad measures 15x15x3mm and carries part number 17077. It suits PC builders and enthusiasts who need a reliable interface for memory modules, voltage regulators or chipset heatsinks.
Builders fitting aftermarket coolers on graphics cards or motherboards will appreciate the pad's adaptability to microscopic scratches and larger surface irregularities. The slightly sticky surface holds position once the protective foil is removed. Users who require a specific thickness not equal to 3mm or a different thermal conductivity rating should look at alternative products.
One pad covers a 15mm square area at 3mm thickness, providing enough material for typical VRAM or VRM modules. It can be cut to smaller shapes for multiple smaller chips. The pad handles high thermal loads thanks to its 5W/mk conductivity. Large heatsink bases exceeding the pad dimensions will need additional pieces to cover the full surface.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Phobya |
| Model name | 17077 |
| Part number | 17077 |
The 15x15mm pad mounts between a heatsink base and the target chip — VRAM on a graphics card, VRM on a motherboard, or a northbridge/southbridge — filling any microscopic gaps or visible scratches.
Yes, the ultra-soft 5 W/mK material compresses under light pressure and its slightly tacky surface grips both sides, so it seals uneven or warped mating faces without extra force.
Remove the protective foil, press the cooler down evenly, then check that the pad has spread to cover the full chip area and shows no trapped air bubbles or lifted edges.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?