PrimoChill Male to Female G 1/4in 25mm SX Extension Coupler diy cooling
A coated-brass G 1/4 in extender adds 25 mm clearance between male and female threads
- Product typeCPU Block
- Extend fitting clearance with 25 mm male-to-female G 1/4 in coupler
- Coated brass body resists corrosion for long-lasting loop reliability
- 30 mm overall height including threads fits tight build spaces
- Pre-installed O-ring on male side ensures leak-free seal
- Trusted US brand with 20 years of water-cooling expertise
Clearance Extension Coupler
This PrimoChill Male to Female G 1/4in coupler adds 25mm of reach between fittings so builders can route tubing around tight component layouts. The coated brass body threads directly into any standard G 1/4in port without adapters. An installed O-ring on the male side seals the joint before the loop is filled. It suits custom-loop builders who need a little extra spacing in a crowded chassis.
Sustained Loop Integrity
Under continuous coolant pressure the brass construction resists deformation and the single O-ring maintains a steady seal throughout long gaming or rendering sessions. No additional sealing compound is required because the factory-fitted ring seats against the female port on tightening. The fixed 30mm overall height keeps the assembly predictable when planning tube runs. The coupler does not restrict flow because its internal bore matches the G 1/4in thread standard.
Thermal Neutral Component
The coupler adds no active cooling surface so it contributes negligible heat to the loop and draws zero power. Coated brass resists corrosion from common coolants, keeping fluid chemistry stable over months of operation. With no moving parts it produces no audible noise under any load condition. Builders should verify clearance allowances in their case before ordering because the fixed length cannot be adjusted after installation.
How it compares
Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 55% of the 609 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | CPU Block |
Other versions of this model
5 more in the same range
PrimoChill Male to Female G 1/4in 50mm SX Extension Coupler diy cooling
- CPU Block
PrimoChill Male-Female G1/4in 40mm SX Extension Coupler
- CPU Block
PrimoChill G 1/4in 3-Way SX Female T Adapter diy cooling
- CPU Block
PrimoChill G 1/4in 7.5mm SX Extension Coupler diy cooling
- CPU Block
Questions about this item
Does the 25mm extension coupler add noticeable heat or restrict flow in a loop running all day?
The coated brass coupler is a passive fitting with no moving parts, so it adds negligible thermal load and does not impede coolant flow during continuous operation.
What existing fittings or components do I need to already have for this G 1/4in male-to-female coupler to work?
You need at least one component with a standard G 1/4in female thread and another with a G 1/4in male thread to connect the coupler between them.
Will the 30mm overall height of this coupler interfere with older water blocks or radiators that have tight port spacing?
The 30mm height includes threads; in tight layouts the extra length can crowd adjacent ports, so measure clearance against your existing blocks and radiators before installing.
More in Heatsinks & Water Blocks
Similar items
Silverstone SST-TP02-M2 M.2 2280 DIY cooling kit
- M.2 length support:…
- Heatsink : 70 mm (W…
Thermaltake CL-W096-CA00BL-A G1/4 PETG 45-Degree Compression Fitting 16mm OD Black diy cooling
Corsair CW-9060056-WW 2.1" 480x480 IPS LCD Upgrade Kit diy cooling
- Display Upgrade Kit
- Black
Phanteks Glacier EZ-Fit Tool Set 16x12mm Hard Tube Bending Tools 45/90/180° with Fill Bottle
- Materials Tube Cutt…
- Tool Set
ENERMAX ESC001-BK M.2 2280 NVMe SSD Heatsink DIY Cooling
- Material: Aluminum,…
- SSD Heatsink
Aquacomputer Mounting Frame for Filter 120mm 38227
- Mounting plate for…










