QAREQU SATA 22pin to 7pin Data + 4pin IDE Power Cable 40cm
Connects a 22-pin SATA drive to motherboard data and 4-pin IDE power in one 40 cm shielded cable supporting 3.0 Gbps
- Product colorBlack & Red
- Connect Serial ATA devices with one cable combining data and power
- 22pin SATA to 7pin data plus 4pin IDE power connector
- Data transfer rates up to 3.0 Gbps supported
- Shielded cable protects against EMI and RFI interference
- 40cm length and 45g weight for compact internal routing
Single-cable SATA data and IDE power adapter
This 22-pin SATA cable splits into a 7-pin data connector and a 4-pin IDE power plug so a desktop hard disk or optical drive connects to the motherboard and power supply with one lead. It is built for builders who need to add a SATA drive to a system that still uses Molex-style power headers. It does not suit IDE hard disks or IDE optical drives, nor drives that require a 15-pin SATA power connector.
Shielded construction for stable 3.0 Gbps transfers
The cable is shielded against EMI and RFI to maintain data rates up to 3.0 Gbps across its 40 cm length. At 45 g it adds negligible weight inside the case and the black-and-red jacket helps identify the data and power branches during installation. No active cooling or additional power circuitry is involved.
Bulk pack includes only the combo cable
The package contains a single SATA combo cable with no drive, mounting screws, adapters or software. The drive shown in product photos is for demonstration only. Buyers needing a 15-pin SATA power connection, right-angle connectors or longer reach must source a different cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black & Red |
Questions about this item
How do I connect the 22pin SATA drive using this 40cm cable?
Plug the 22pin end into the drive, the 7pin data connector into the motherboard SATA port, and the 4pin IDE power connector into a Molex lead from the power supply; the cable carries both signals in one run.
Will the shielding or connectors degrade and need replacement?
The shielded 45g cable has no moving parts or active components, so it does not wear out; replace it only if the 7pin data plug, 4pin power plug, or 22pin drive connector becomes physically damaged.
What throughput ceiling appears first during long transfers?
The 3.0 Gbps SATA data link sets the maximum sustained rate, so continuous reads or writes cannot exceed that interface limit.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





