Qin Bo Electronics PCI Express 36PIN 1X Extender Cable White 15cm FFC
A 15 cm flat-flexible extender with a gold-plated 36-pin PCIe x1 connector for board-level debug and test work
- Product typeExtension Cables
- Product colorWhite
- DetailsPCI-E 36PIN Extender Cable
- Key featuresWith Gold-Plated Connector,36PIN
- 15 cm FFC cable gives flexible routing inside tight cases
- 36-pin PCIe x1 edge-free connector accepts x4, x8 and x16 cards
- gold-plated contacts reduce signal loss during debug and test
- weighs 16 g for minimal load on motherboard slot
- white finish matches light-themed builds
PCI Express 36PIN 1X Extender Cable
The Qin Bo Electronics PCI Express 36PIN 1X Extender Cable is a debug and test tool designed to minimise signal degradation. It uses a flat flexible cable for adaptable routing inside a chassis. The gold-plated connectors ensure reliable contact during repeated insertion cycles. Engineers and technicians use it to protect motherboard slots during hardware validation.
Thermals noise and power draw
As a passive cable assembly the product generates no heat and produces no audible noise during operation. It draws no power of its own and simply passes signals between the host and the add-in card. The 15 cm flat flexible cable keeps the signal path short to preserve integrity. Normal use adds no thermal load to the system.
36PIN gold-plated connector
The single specification that decides suitability is the 36PIN gold-plated connector matching a PCI Express x1 edge connector. Cards requiring x4 x8 or x16 mechanical slots are also physically compatible because the x1 connector is edge-free. Buyers who need a different pin count or a right-angle bracket cannot use this part.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Qin Bo Electronics |
| Model name | PCI Express Cable |
| Product type | Extension Cables |
| Product color | White |
Questions about this item
How do I install the 36PIN PCIe x1 extender with the 15cm FFC cable and avoid the common mistake?
Align the gold-plated 36PIN connector with the motherboard x1 slot, then attach the FFC cable to the riser board; the step often missed is fully seating the FFC into its latch before powering on.
What maintenance or replacement will the white 36PIN extender and FFC cable need later?
Inspect the gold-plated contacts and FFC crease points periodically; replace the 15cm FFC if the flexible cable shows cracking or the connector pins become bent.
What limit appears first when the 36PIN extender runs under sustained load?
Signal integrity over the 15cm FFC is the first constraint; the extender is designed to minimise degradation, but extended high-speed use will hit the cable’s length-related timing margin first.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Nippon Labs POW-05206 6.1 in 5.25 Male to 3.5 Female Internal Power Cable
- 6.1 in (15.5 cm)
- Multi-Color





