Rocstor Premium 2.5GbE USB-A to Ethernet Adapter
Adds 2.5GbE wired networking to USB-A laptops with multi-speed support down to 10M and no external power needed
- Multi-speed Ethernet up to 2.5 Gbps
- USB 3.0 Type-A plug works with many laptops
- Wake-On-LAN lets you wake the PC remotely
- Full-duplex flow control keeps data moving smoothly
- Bus-powered design needs no extra power supply
Professional Network Adapter
The Rocstor Premium 2.5GbE USB-A to Ethernet Adapter adds a high-speed RJ45 port to USB 3.0 Type-A devices such as HP ZBook, Dell Precision, and Lenovo systems. It targets professionals who need reliable wired connectivity without opening their laptop or workstation. The adapter draws power directly from the USB bus, so no external supply is required.
Portable Build and Connectors
A compact plastic housing protects the controller while keeping the unit light enough for daily carry. The fixed USB-A plug inserts into any USB 3.0 port and also operates on legacy ports at reduced throughput. The RJ45 jack locks securely with a standard latch, resisting accidental disconnects during transport or desk vibration.
Multi-Rate Ethernet Performance
The controller negotiates automatically at 10M, 100M, 1G, and 2.5G speeds, delivering full-duplex flow control and Wake-On-LAN support. This makes the adapter the right part for networks that have already migrated beyond 1G but have not yet adopted 10G infrastructure. It will not satisfy buyers who need 10G or fibre connectivity.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 63% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Rocstor |
Questions about this item
What real-world throughput does the USB 3.0 Type-A interface cap the 2.5 GbE link at?
The USB 3.0 Type-A port limits the adapter to its 5 Gbps signalling rate, so the 2.5 GbE connection runs at line speed while leaving headroom for protocol overhead.
Does the adapter need a separate power brick or mounting bracket to work?
No, it draws all power from the USB bus and has no mounting holes; just plug the Type-A connector into the host and the RJ45 cable into the network.
After plugging it in, what driver step is required before Wake-On-LAN will function?
Install the vendor driver for your operating system, then enable Wake-On-LAN in the adapter’s advanced properties or the system BIOS.
More in Interface & Card Adapters
Similar items
Richer-R Mini PCI-E to PCI-E 16x Riser Adapter with SATA Power Cable
- 1.8 L x12 W x14 H c…
- Usb, 0 L x0 W x0 H…





