RUITEXUN IDE4P-SATA15P Molex 4-Pin Male to SATA 15-Pin Female Power Adapter Cable 20cm
Converts a Molex 4-pin plug into a SATA 15-pin power connector for drives, 20 cm long
- Connector details4 Pin
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorBlack
- Key featuresHigh Speed
- Converts legacy Molex power to SATA 15-pin for modern drives
- 20 cm length fits tight chassis routing without excess cable clutter
- Copper conductors deliver reliable power to HDDs, SSDs and optical drives
- Plug-and-play adapter requires no drivers or configuration to operate
- Male 4-pin Molex to female 15-pin SATA updates older PSUs for new devices
Molex-to-SATA power adapter for legacy PSUs
This 20 cm cable converts a Molex 4-pin male connector into a SATA 15-pin female connector, letting older power supplies drive modern SATA hard drives, solid-state drives and optical drives. Copper conductors carry the required power lines and the black jacket keeps the short run tidy inside the case. Plug-and-play installation needs no tools or drivers.
Suits builders reusing an older PSU.
Anyone upgrading storage on a system that only offers Molex power plugs will find this adapter a direct solution. It does not help if the power supply already provides native SATA connectors or if the device requires a Molex plug instead of a SATA receptacle.
The 15-pin SATA female connector decides fit
The single specification that determines compatibility is the 15-pin SATA power receptacle on the drive or device. If the target hardware uses that exact connector, the adapter will mate correctly; otherwise a different cable is required.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | RUITEXUN |
| Model name | IDE4P-SATA15P |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector details | 4 Pin |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How can I confirm the adapter is delivering power to my SATA drive after connecting it?
The drive should spin up and appear in the BIOS or operating system once the Molex 4-pin male end is plugged into the PSU and the 15-pin SATA female end into the drive.
What comes in the package and do I need any extra cables or tools?
The box contains one 20cm Molex IDE 4-pin male to 15-pin SATA female adapter cable; no additional cables or tools are required for installation.
Which version of this adapter should I choose for a standard SATA hard drive or SSD?
The single listed model IDE4P-SATA15P with a 15-pin SATA female connector is the correct version for powering standard SATA HDDs and SSDs from a Molex 4-pin PSU output.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





