Ruth's sister IDC40P to Terminal IDC Male 2.54mm Screw-Free Terminal Block Breakout 40pin internal power cable
Connects a 40-pin IDC header to screw-free 2.54 mm terminal blocks for PLC or relay wiring
- Screw-free 2.54 mm terminals speed up wiring
- 40-pin IDC male matches standard ribbon cables
- Breakout block converts flat cable to screwless terminals
- IDC-to-terminal adapter simplifies PLC and relay connections
40-pin IDC breakout for PLC wiring
This cable converts a 40-pin IDC header into a screw-free terminal block with 2.54 mm pitch. It targets engineers and hobbyists who need to connect ribbon cables to PLC relay modules without soldering. The adapter simplifies prototyping and panel wiring by exposing every conductor on a reusable terminal strip. Installation requires only a standard IDC press tool.
Sustained signal integrity across all 40 contacts
The screw-free clamps maintain consistent contact pressure during continuous operation, reducing resistance drift compared to spring-only terminals. Each 2.54 mm spaced terminal accepts solid or stranded wire for reliable power and signal distribution. The IDC insulation-displacement connection remains gas-tight under thermal cycling, preventing intermittent faults in long-running automation tasks.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $35.99
- Pricier than about 75% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 40-pin IDC connector generate noticeable heat when powering a relay board continuously?
The adapter is a passive 40-pin IDC to 2.54 mm screw-free terminal block; it has no active components, so it does not produce measurable heat during continuous operation.
What must already be installed for the 40-pin IDC male header to connect properly?
A matching 40-pin IDC female socket with 2.54 mm pitch on the source device or cable is required for the male header to seat correctly.
More in Internal PSU & Riser Cables
Similar items
SXDOOL 10-Pack PCIe 8-Pin Female to Dual 6+2-Pin Male Splitter Cable 18AWG 20cm
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister CXA-0420 PCU-P213C LCD Inverter internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





