SATACables 26SR991YL 39 inch SATA cable 26AWG straight to right
A 39-inch SATA II cable with 26AWG shielding, right-angled connector and narrow design for better airflow
- 3 Gbps throughput from SATA revision 2.0 spec
- Right-angle connector eases routing in tight cases
- Narrow 26AWG cable improves internal air flow
- Double shielding blocks EMI and RFI noise
- Works with SATA 1.0 and 2.0 devices
Cable type and audience
This 39 inch SATA cable uses 26AWG conductors and a straight-to-right connector layout to link Serial ATA drives to a SATA controller. It suits desktop or server builders who need a thin, shielded lead for internal drive connections.
Thermals noise and power
The narrow cable profile reduces bulk inside the chassis so airflow to other components is less obstructed. Double shielding protects the signal from EMI and RFI without adding measurable heat or power draw of its own.
Build fit and constraints
The right-angle plug eases routing in tight drive bays or against motherboard edges where a straight plug would press on neighbouring parts. Backwards compatibility with SATA revision 1.0 lets the same lead work with older drives or controllers.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.78
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 26SR991YL |
Questions about this item
How do I route the 39 inch 26AWG cable so the right-angle connector seats fully?
Feed the narrow 26AWG cable along the chassis edge, keep the bend radius gentle, and press the right-angle plug straight into the drive port until the latch clicks — forcing it at an angle is the step most people get wrong.
When will the double-shielded SATA 2.0 cable need replacement?
Replace it if the shielding braid frays, the latch tab snaps off, or intermittent errors appear after repeated drive swaps — otherwise the 26AWG conductors and EMI/RFI shielding last the life of the build.
At what sustained throughput does the SATA 2.0 link hit its ceiling?
The 3.0 Gbps SATA 2.0 specification caps continuous transfer at 3.0 Gbps, so mechanical drives and optical units will saturate the link before the 26AWG cable becomes the bottleneck.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside DS-0767 6mm Metallic Red Sleeving 1ft
- Red
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





