SATACables 30SR407YL 16in SATA III cable straight to right angle
16-inch yellow SATA III cable with straight and right-angle 7-pin connectors supports 6.0 Gbps throughput
- SATA III 6.0 Gbps throughput for fast data transfer
- Straight to right-angle connectors simplify tight-case routing
- 16 inch length reduces cable clutter inside chassis
- 30 AWG double-shielded construction preserves signal integrity
- Yellow colour aids quick identification among other cables
16-inch SATA III cable for tight builds
This 16-inch yellow cable connects a Serial ATA drive to a motherboard or controller using a straight plug on one end and a right-angle plug on the other. It supports the SATA 3.0 specification for up to 6.0 Gbps throughput. The 30AWG double-shielded conductors keep the cable slim so it does not block airflow in crowded cases. It suits desktops or servers that run multiple drives and need reliable signal quality.
Replaces loose or straight-only cables in cramped
The right-angle connector lets the cable hug the drive or motherboard edge, saving space where a straight plug would press against a side panel or adjacent card. Upgrading from an older SATA II lead restores the full 6.0 Gbps link speed for modern SSDs and hard disks. The jump is worth it when cable routing is tight or when an existing lead shows intermittent errors on a 6 Gbps device.
Check port orientation and clearance before ordering
Verify that the host port and the device port can accept a right-angle plug pointing in the needed direction; some board layouts force the angle toward an obstruction. Ensure the 16-inch length reaches between your specific drive mount and the motherboard connector without tension. The cable uses standard 7-pin female ends, so it fits any SATA or eSATA port, but it will not work with drives that require a different power or data interface.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.24
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 30SR407YL |
Questions about this item
Will the 16 inch length and right-angle connector fit behind my drive cage?
The cable measures 16 inches end to end with one straight and one right-angled 7-pin SATA connector, so measure from your motherboard port to the drive bay to confirm clearance.
Do I need to align a key or latch when plugging the 7-pin connectors?
Each 7-pin SATA connector has an L-shaped key; insert it straight until the metal latch clicks — forcing it at an angle bends the fragile 30 AWG pins inside the double-shielded jacket.
How often should I replace this SATA III cable in a multi-drive server?
The 30 AWG double-shielded design is rated for the 6.0 Gbps SATA 3.0 spec; replace only if you see intermittent detection, CRC errors, or physical kinks near the right-angle bend.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





