SATACables 30SR483BL 19in SATA III Cable Straight to Right Angle 1.58 ft
A 19-inch SATA III cable with straight and right-angle connectors supports 6.0 Gbps throughput and includes locking latches on both sides
- Cable length1.58 ft (0.48 m)
- SATA III revision 3.0 delivers up to 6.0 Gbps throughput
- Locking latch on both ends prevents accidental disconnection
- Straight-to-right-angle design fits tight chassis spaces
- 19 in (1.58 ft) length suits compact builds
- Backward compatible with SATA I and SATA II devices
Product Identity
The SATACables 30SR483BL is a SATA III internal cable measuring 19 inches or 1.58 ft. It connects a host motherboard to Serial ATA hard drives, optical drives or other SATA devices. The straight-to-right-angle design suits builders routing cables in tight chassis spaces. It serves anyone adding or replacing a SATA drive in a desktop system.
Build and Connectors
The cable uses standard moulded ends with locking latches on both sides to resist accidental disconnection. Its black sheath gives a low-profile look inside the case. Backwards compatibility with SATA I and SATA II devices means it works with older drives as well as current SATA III hardware. The right-angle plug reduces strain on the drive port during routine handling.
Compatibility Check
Verify that your motherboard and target drive both expose standard SATA data ports. Confirm the 19-inch reach spans the distance between the board header and the drive bay in your chassis. Ensure no adjacent components block the right-angle connector orientation you need. The cable carries data only; a separate power lead from the PSU remains required for the drive.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.71
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 30SR483BL |
| Size & build | |
| Cable length | 1.58 ft (0.48 m) |
Questions about this item
What maximum data rate does the SATA III interface on this cable support?
The SATA III interface supports up to 6.0 Gbps data throughput.
What connector orientations does the 30SR483BL cable use for motherboard and drive connections?
It has a straight connector on one end and a right-angle connector on the other.
How do you secure the locking latches when installing this cable?
Press each connector firmly until the latch on both sides clicks into the port.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





