SATACables 30SR991YL SATA cable 39in straight to right angle yellow 30AWG
A 39-inch yellow SATA cable with straight and right-angle connectors supports 6.0 Gbps throughput for drives and optical devices
- Overall length36–40 in"
- SATA 3.0 revision delivers up to 6.0 Gbps throughput
- Straight-to-right-angle connectors simplify routing in tight cases
- 39 inch length reaches drives across full-tower chassis
- Yellow 30 AWG jacket aids quick cable identification
- Double shielding protects signal integrity for reliable transfers
Connector Layout for Tight Builds
This yellow SATA cable uses a straight connector on one end and a right-angle connector on the other. The 30AWG double-shielded construction keeps the cable thin for better internal airflow. It supports SATA revision 3.0 for data rates up to 6.0 Gbps.
Suits Single-Drive Upgrades
Builders routing a single drive behind a motherboard tray or along a chassis wall will benefit from the right-angle end. Systems that require left-angle orientation, latched connectors, or cables shorter than 36 inches should look at other options.
Length Range Decides Fit
The cable measures between 36 and 40 inches end to end. Measure the path from your controller port to the drive bay before ordering; a shorter or longer run will need a different length.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.76
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 30SR991YL |
| Size & build | |
| Overall length | 36–40 in" |
Questions about this item
Will the 39in yellow 30AWG cable with a right-angle connector fit in a tight server chassis?
The 39in length and right-angle connector are designed for multi-drive desktops and servers, while the 30AWG double-shielded build keeps the cable narrow to maintain internal airflow.
How do I connect the straight and right-angle ends of this SATA III cable correctly?
Plug the straight 7-pin female connector into the motherboard or controller port, then attach the right-angle 7-pin female connector to the drive; the angle routes the cable along the chassis to reduce strain.
When should I replace this double-shielded SATA cable?
Replace it if the connectors become loose, the jacket shows kinks or cuts, or you experience intermittent drive detection and data errors during heavy transfers.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside DS-0767 6mm Metallic Red Sleeving 1ft
- Red
- Tired of your cable…





