SATACables 30SS991BL 39 inch SATA III cable with latch
A 39-inch SATA III cable with latching 7-pin connectors delivers up to 6.0 Gbps throughput
- SATA III 6.0 Gbps throughput for fast data transfers
- 39 inch length suits full-tower and multi-drive builds
- 30 AWG double-shielded cable resists EMI and RFI
- Latching 7-pin connectors on both ends secure the link
- Narrow profile eases routing and improves internal airflow
39-inch SATA III cable with latching connectors
This 39 inch internal SATA III cable links a Serial ATA drive or optical unit to a motherboard or controller. It supports the SATA revision 3.0 interface for up to 6.0 Gbps data throughput. Both ends use 7-pin female connectors with a latch to prevent accidental disconnection. The 30AWG double-shielded construction reduces EMI and RFI interference.
Narrow shielded design eases routing and airflow
The slim 30AWG profile simplifies cable routing inside crowded chassis and leaves more space for air movement around drives and expansion cards. Shielding protects signal integrity across the full length. Dual latching connectors lock securely into standard SATA ports on drives and host controllers. No additional adapters or power leads are required for the data link.
Suits builds needing long reach and secure fit
Builders who need a 39 inch run between drive bays and motherboard headers will find the length convenient. The latching ends help in systems subject to vibration or frequent drive swaps. Users requiring right-angle connectors, shorter cables, or external eSATA connections should look at other cable types.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.98
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 30SS991BL |
Questions about this item
Will the 30AWG conductors limit sustained 6.0 Gbps transfers over the 39 inch length?
The 30AWG double-shielded cable is rated for SATA 3.0 at 6.0 Gbps, so the gauge supports the full specification speed across the 39 inch run.
Does the shielding add heat or noise when the cable runs all day in a multi-drive server?
The shield protects against EMI and RFI without generating heat or noise; the narrow 30AWG profile actually improves internal airflow compared with wider ribbon cables.
Must my motherboard and drive both have latching 7-pin SATA ports for this cable to work?
Yes — both connectors are latching 7-pin female, so the host controller and the target device each need a standard SATA 7-pin receptacle.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0767 6mm Metallic Red Sleeving 1ft
- Red
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





