SATACables LP30SR483 SATA cable 1.58 ft
A 1.58 ft internal SATA cable with low-profile right-angle and straight connectors for tight spaces
- Cable length1.58 ft (0.48 m)
- 19 inch low-profile right-angle connector fits tight spaces
- SATA III 6.0 Gbps throughput handles modern SSD speeds
- Backwards compatible with SATA 1.5 Gbps and 3.0 Gbps devices
- Shielded cable with silver mesh blocks EMI and RFI interference
- Flexible rubber sleeve improves airflow and simplifies cable routing
What this cable connects
The SATACables LP30SR483 is a straight-to-right-angle SATA cable measuring 1.58 ft. It links a motherboard host port to a Serial ATA hard drive, optical drive or other SATA device inside a PC, notebook or server. The low-profile right-angle connector saves space in tight drive bays.
SATA 6 Gbps practical ceiling
The cable supports the SATA 6.0 Gbps specification and is backwards compatible with 1.5 Gbps and 3.0 Gbps devices. Actual throughput will not exceed the slowest link in the chain — drive, controller or cable — so a SATA I drive will still run at 1.5 Gbps. The shielded, flexible sleeve resists EMI and vibration without stiffening the run.
Check connector orientation and length
Verify that your motherboard port and drive socket accept a straight plug on one end and a right-angle plug on the other. Confirm that 1.58 ft spans the distance between them without tension. The yellow low-profile housing fits most standard drive bays, but very shallow enclosures may still block the right-angle bend.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.68
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | LP30SR483 |
| Size & build | |
| Cable length | 1.58 ft (0.48 m) |
Questions about this item
Should I pick the 1.58 ft cable or a longer run for my build?
The 1.58 ft length suits tight internal routing between a motherboard and a nearby drive. Choose a longer cable only if the drive bay sits farther from the SATA port.
What does the 6.0 Gbps rating deliver once the cable is installed?
It supports the full SATA III 6.0 Gbps link speed between host and device, so a modern SSD or HDD can run at its rated throughput without cable bottleneck.
Which SATA standard does this cable use and what speed does that cap at?
The cable meets the SATA 6.0 Gbps (SATA III) specification, capping the link at 6.0 Gbps while remaining backward compatible with 1.5 and 3.0 Gbps devices.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables 30SR330YL 13in SATA III Cable Straight to Right Angle
- 1.08 ft / 8 in





