SATAGear 15-Pin SATA to 4-Pin Molex Power Adapter Cable
Converts a 4-pin Molex power connector to a 15-pin SATA power plug for SATA drives
- Connector details1 x SATA to 1 x SATA
- Converts legacy Molex power to SATA drives
- Right-angle plug fits tight drive bays
- 15-pin SATA connector supports SATA and SATA II
- 6-inch length reduces cable clutter inside case
- New condition ensures reliable power delivery
Right-Angle SATA Power Adapter
This 15-pin SATA to 4-pin Molex adapter lets you power a SATA drive from a legacy power supply connector. It suits builders adding a SATA SSD or hard drive to a system that only offers Molex power leads. The right-angle plug eases routing in tight drive bays or behind motherboard trays.
Simple Press-Fit Installation
Push the Molex female end onto a power-supply lead and the SATA male end onto the drive until both seat firmly. The only common issue is reversing the Molex connector; the keyed shape prevents damage but the drive will not spin up until it is flipped. No tools or drivers are required.
Check Power-Supply Connectors First
Verify that your power supply has an unused 4-pin Molex lead before ordering. If the unit only provides SATA power plugs, this adapter is unnecessary and will not fit. Also confirm the drive uses a standard 15-pin SATA power port rather than a proprietary connector.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.50
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Ports & slots | |
|---|---|
| Connector details | 1 x SATA to 1 x SATA |
Questions about this item
How do I confirm the adapter is delivering power to the SATA drive after connecting it?
The drive should spin up and appear in the system BIOS or operating system once the 15-pin SATA connector is seated and the Molex plug is powered.
What connectors are included on the cable and what additional parts are needed?
The cable has a 4-pin Molex female connector on one end and a 15-pin SATA power plug on the other; a free Molex lead from the power supply is required.
Which version of this adapter should I choose for a SATA II hard drive?
This adapter converts a standard 4-pin Molex connector to the 15-pin SATA power interface used by SATA and SATA II drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





