SATAGear eSATA-IL-1M SATA cable 3 ft
Connects internal SATA drives to external eSATA ports at up to 600 MB/s over 3 ft
- Overall length3 ft (0.91 m)
- Connects internal SATA drives to external eSATA ports using the SATA L to eSATA I connector design
- Supports SATA 150, 300 and 600 speeds meeting Gen 1 through Gen 3 specifications
- Shielded construction maintains 100 ohm differential impedance for reliable signal integrity
- Rated for 1.5 A at 30 V with 500 V dielectric withstand for safe power delivery
- Operates from -55 °C to +105 °C with 1000 Mohm insulation resistance for harsh environments
Connection type
The SATAGear eSATA-IL-1M is a 3 ft cable that joins an eSATA type I port to an internal SATA type L connector. It links external enclosures or docks to a motherboard or controller card. The shielded assembly meets SATA Gen 1 through Gen 3 electrical specifications for 150, 300 and 600 MB/s signalling.
Differential impedance
A 100 ohm differential impedance and 25 to 40 ohm common-mode impedance preserve signal integrity across the Gen 3 rate. The cable is rated for 1.5 A contact current at 30 V and passes a 500 V dielectric test. Insulation resistance exceeds 1000 Mohms.
Operating envelope
The design operates from -55 °C to +105 °C, giving headroom for warm chassis or outdoor enclosures. Length is fixed at 3 ft, so runs beyond that distance need a different cable. It carries data only and does not supply drive power.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $1.93
- Cheaper than about 97% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | eSATA-IL-1M |
| Size & build | |
| Overall length | 3 ft (0.91 m) |
Questions about this item
What speed will I actually see when I connect a SATA 600 drive with this cable?
The cable meets SATA 150, 300 and 600 specifications, so a SATA 600 drive can run at its full 600 MB/s rate provided the host port also supports that generation.
Which eSATA and SATA connector types does this cable use, and what does that limit?
It has an eSATA type I plug on one end and a SATA type L plug on the other, so it only fits ports with those exact connector shapes.
How much clearance do I need behind the drive for the right-angle SATA connector?
The SATA type L connector is right-angled, so it sits close to the drive body and needs only a few millimetres of rear clearance.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





