SATAGear eSATA-iL-2M SATA cable 6 ft
A shielded 6 ft cable connects an eSATA port to an internal SATA drive and meets SATA 150, 300 and 600 specifications
- Cable length6 ft (1.83 m)
- Connects SATA and eSATA devices with a 6 ft cable
- Supports SATA 150 300 and 600 speeds for broad compatibility
- Shielded construction maintains signal integrity over the full length
- Rated for 1.5 A current and 30 V voltage for reliable power delivery
- Operates from -55 °C to +105 °C for demanding environments
Purpose and Audience
The SATAGear eSATA-iL-2M is a six-foot cable that connects an external eSATA type I port to an internal SATA type L connector. It suits builders who need to link an external drive enclosure or docking station to a motherboard or controller inside the case.
Who It Is Not For
Buyers whose equipment uses a different external connector such as eSATA type II or a USB interface cannot use this cable. Systems that require an internal-to-internal SATA link or a shorter run for tight cable management should consider other options.
Deciding Specification
The cable meets SATA Gen 1, Gen 2 and Gen 3 electrical specifications, supporting 150, 300 and 600 MB/s signalling rates. Its 100-ohm differential impedance and shielding preserve signal integrity across the full six-foot length.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $1.95
- Cheaper than about 97% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | eSATA-iL-2M |
| Size & build | |
| Cable length | 6 ft (1.83 m) |
Questions about this item
What connectors are on each end of the 6 ft cable?
One end has a SATA L-type connector and the other end has an eSATA I-type connector for external connections.
Does this 6 ft cable support SATA 6 Gb/s speeds?
Yes, it meets SATA Gen 1 through Gen 3 specifications covering 150, 300 and 600 MB/s transfer rates.
What voltage and current can the cable contacts handle?
The contacts are rated for 1.5 A at 30 V with insulation resistance of 1000 Mohms and differential impedance of 100 ohms.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside DS-0966 SATA M/F Extension Cable Jet Black
- Black
- Compliment your bui…





