SATAGear R-SS-043RL SATA Cable 17in Right to Left Angle
A 17-inch internal SATA cable with right-to-left angled connectors for tight drive bays
- Cable length1.41 ft / 1.08 ft / 10.23 in / 8.66 in
- Right-angled connector simplifies routing in tight cases
- Left-angled end eases access on crowded motherboards
- 17 in length fits mid-tower and server chassis
- Shielded cable protects signals from EMI and RFI
- Supports 6.0 Gbps transfer for fast drive performance
Cable orientation and fit
The SATAGear R-SS-043RL is a 17in internal SATA cable with a right-angle connector on one end and a left-angle connector on the other. It links a Serial ATA hard drive, optical drive or other SATA device to a motherboard or controller card. The angled ends help route the cable cleanly in tight chassis corners.
Airflow, noise and power
The narrow, shielded cable body reduces bulk inside the case so air can move past it more freely. No fan or active component is present, so the cable adds no audible noise. It carries only the low-voltage SATA signal, drawing negligible power from the host controller.
Sustained data transfer
The cable meets the Serial ATA 1.0 standard and supports signalling rates up to 6.0 Gbps. Shielding protects the differential pairs from EMI and RFI during continuous operation. Dual 7-pin female connectors maintain a secure link for long file copies or server workloads without signal degradation.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.70
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | R-SS-043RL |
| Size & build | |
| Cable length | 1.41 ft / 1.08 ft / 10.23 in / 8.66 in |
Questions about this item
How do I route the 17in right-to-left angle SATA cable in a tight case?
Connect the right-angle (down) end to the drive and the left-angle (up) end to the motherboard port; the 1.08 ft narrow shielded cable simplifies routing and improves airflow.
Will the EMI-shielded 7-pin connectors degrade over time?
The shielded 7-pin female connectors meet SATA 1.0 standards and are rated for 6.0 Gbps; no periodic replacement is required under normal desktop or server use.
At what sustained throughput does the 1.41 ft cable hit its 6.0 Gbps limit?
The cable supports up to 6.0 Gbps Serial ATA signalling; sustained transfers at that rate are within specification for compatible drives and controllers.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables 30SR330YL 13in SATA III Cable Straight to Right Angle
- 1.08 ft / 8 in
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





