SATAGear R-SS-1MSS 40in SATA III straight-to-straight cable
A 40-inch straight-to-straight SATA III cable supporting 6.0 Gbps throughput with shielded 7-pin connectors
- 6 Gbps throughput with SATA 3.0 revision
- Narrow shielded cable improves airflow and reduces EMI
- Straight 7-pin female connectors on both ends
- 40 inch length suits full-tower drive placement
- Backward compatible with SATA 1.0 devices
What this cable is and who needs it
This 40in internal SATA III cable connects a Serial ATA drive or optical unit to a SATA controller at up to 6.0 Gbps. It uses straight 7-pin female connectors on both ends and a shielded, narrow profile that eases routing and improves case airflow. The link meets the Serial ATA 1.0 standard and suits desktop or server builds with multiple drives.
Builders who benefit and those who should not
Installers who want a tidy, shielded run between a drive and a motherboard or host adapter will find the slim design simple to route. Buyers who need right-angle connectors for tight clearance, an external eSATA bracket connection, or a longer run than 40in should look at a different cable.
Behaviour under sustained load
The shielded construction protects the 6.0 Gbps signal from EMI and RFI during continuous transfers, while the narrow jacket keeps airflow steady around other components. Performance remains consistent for long copy jobs or server workloads without the signal degradation that can appear on unshielded ribbon-style cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.69
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | R-SS-1MSS |
Questions about this item
What SATA controller do I need for this 40in straight-to-straight cable?
A motherboard or add-in card with a standard 7-pin SATA port provides the controller; the cable itself carries the signal between that port and the drive.
Will this cable slow down an older SATA 1.0 drive I still use?
The cable meets SATA 1.0 standards and supports up to 6.0 Gbps, so the older drive runs at its native speed without bottleneck.
How do I confirm the link is running at 6.0 Gbps after I connect it?
Check the negotiated speed in BIOS or the operating system storage utility; it will report the active link rate for the attached drive.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables 30SR330YL 13in SATA III Cable Straight to Right Angle
- 1.08 ft / 8 in
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





