SATAGear SS-01MRR SATA cable 4 in right to right angle
A 4-inch right-angle SATA cable with dual 7-pin female connectors supporting up to 6.0 Gbps data transfer
- Cable length4 in (10.2 cm)
- Right-angle connectors fit tight drive bays
- Supports 6.0 Gbps SATA transfer speeds
- Narrow cable design improves internal airflow
- Shielded construction reduces EMI/RFI interference
- Dual 7-pin female connectors for standard SATA devices
SATA cable for tight drive bays
This four inch SATA cable uses right angle connectors on both ends to fit cramped drive bays and stacked drive cages. It links a Serial ATA hard drive optical drive or other SATA device to a motherboard or controller port. The short length keeps excess wire out of the airflow path. Builders working in compact cases or dense server chassis will find the angle convenient.
Check port orientation and clearance
Verify that both the drive and the host port accept a right angle plug pointing downward. Measure the gap between the drive connector and any adjacent component to confirm the forty five degree bend will seat fully. Ensure the system uses standard seven pin SATA data ports rather than a proprietary header. The cable carries data only so a separate power connection is still required.
Shielded narrow jacket aids routing
The cable meets Serial ATA 1.0 specification and is shielded against EMI and RFI interference. Its narrow jacket simplifies routing behind drive trays and improves internal airflow compared with older ribbon cables. Dual seven pin female connectors lock securely into place. The right to right angle lets the cable run parallel to the drive surface reducing strain on the port during vibration or transport.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.69
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-01MRR |
| Size & build | |
| Cable length | 4 in (10.2 cm) |
Questions about this item
Does the 4 in right-to-right SATA cable come with any extra brackets or screws, or is it just the cable?
Only the 4 in SATA cable with dual 7-pin female connectors is supplied; no brackets, screws or additional hardware are included.
Should I choose a longer cable if my drive sits farther from the motherboard port?
Yes — this model is a fixed 4 in length, so a longer cable is needed when the drive cannot be reached within that distance.
Will the 6.0 Gbps rating be achieved with a SATA 1.0 controller?
The cable meets SATA 1.0 standards and supports up to 6.0 Gbps, but the actual transfer rate is limited by the controller and drive capabilities.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
SATACables 30SR330YL 13in SATA III Cable Straight to Right Angle
- 1.08 ft / 8 in
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





