SATAGear SS-02MSL SATA Cable 8in Straight to Left Angle
An 8-inch internal SATA cable with a straight connector on one end and a left-angled connector on the other, supporting 6.0 Gbps transfer rates
- Straight-to-left-angle design simplifies tight drive-bay routing
- Narrow cable profile improves internal airflow and eases installation
- Shielded construction protects signals from EMI and RFI interference
- Supports 6.0 Gbps data rates for fast SATA device performance
- Dual 7-pin female connectors fit hard drives and optical drives
SATA 6.0 Gbps internal cable
This 8-inch cable links a Serial ATA drive to a motherboard or controller at up to 6.0 Gbps. It uses two 7-pin female connectors, one straight and one left-angled, to suit tight drive bays. The narrow, shielded design reduces EMI and improves airflow inside the case.
Suits builds with cramped drive bays
Installers who need a left-angled connector to clear adjacent components will benefit from the angled end. Builders who require a right-angled or straight-to-straight layout should choose a different cable. The 1.0 standard support covers legacy controllers but offers no advantage on newer 3.0-only hosts.
Straight-to-left 7-pin orientation
The single deciding specification is the connector geometry: one straight 7-pin female plug and one left-angled 7-pin female plug. This orientation determines whether the cable fits the physical space between the drive and the motherboard port.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $1.09
- Cheaper than about 98% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-02MSL |
Questions about this item
Does the 8-inch SS-02MSL cable generate any heat or noise during continuous operation?
This passive SATA cable has no active components, so it produces no heat or noise regardless of how long the system runs.
What must already be present in the system for the SS-02MSL to function?
A motherboard or controller with a standard 7-pin SATA port and a drive or device that also provides a 7-pin SATA connector.
Will the SS-02MSL work with drives that only support the Serial ATA 1.0 standard?
Yes, the cable meets the Serial ATA 1.0 specification and supports data rates up to 6.0 Gbps, so it is fully compatible with older SATA devices.
More in SATA & eSATA Drive Cables
Similar items
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside DS-0767 6mm Metallic Red Sleeving 1ft
- Red
- Tired of your cable…





