SATAGear SS-043RR 17in SATA Cable Right to Right Angle
A 17-inch internal SATA cable with right-angle connectors on both ends for tight drive bays, supporting 6.0 Gbps data rates and shielded against EMI/RFI
- Cable length1.41 ft / 1.08 ft / 10.23 in / 8.66 in
- Right-angle connectors fit tight drive bays
- 17-inch length reaches across full-tower cases
- 0 Gbps bandwidth supports modern SSDs
- Narrow shielded cable improves chassis airflow
- Dual 7-pin female ends connect drive to controller
Right-Angle SATA Cable for Tight Builds
The SATAGear SS-043RR is a 17in internal SATA device cable with right-angle 7-pin female connectors on both ends. It links Serial ATA hard drives, optical drives or other SATA devices to a host controller. The right-to-right orientation suits cramped drive bays or back-to-back drive stacking where straight plugs would foul adjacent components.
Shielded Narrow Design Aids Airflow
A slim, shielded jacket reduces bulk compared with legacy ribbon cables, easing routing and improving case airflow. EMI and RFI shielding protects signal integrity up to the 6.0 Gbps SATA interface limit. Dual female 7-pin ends lock securely, so vibration in desktop or server chassis does not unseat the connection during daily operation.
Replaces Straight or Left-Angle Cables in Dense
Use this cable when a straight plug blocks a neighbouring slot or a left-angle forces the cable across a GPU. The 1.41 ft length reaches most motherboard-to-drive runs without excess slack. It is not suited for external eSATA ports or for builders who need a straight-to-right or straight-to-straight connector pairing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.45
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-043RR |
| Size & build | |
| Cable length | 1.41 ft / 1.08 ft / 10.23 in / 8.66 in |
Questions about this item
What SATA revision does the SS-043RR cable support and what is the maximum data rate?
The cable meets the Serial ATA 1.0 standard and supports data transfer rates up to 6.0 Gbps.
What are the connector angles and how much clearance do they need?
Both ends have right-angle (down) 7-pin female connectors, allowing the cable to run parallel to the drive or motherboard in tight spaces.
How do I orient the right-angle connectors during installation?
Align the L-shaped key on each 7-pin female connector with the corresponding notch on the device and controller ports, then press straight in until seated.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





