SATAGear SSL-1MSR SATA cable 40in straight to right angle latching
A 40in SATA cable with straight and right-angle latching connectors supporting 6Gbps data rates
- 6Gbps signal rate supports fast SATA storage
- 40in straight-to-right-angle reach fits full-tower builds
- Auto-releasable latches lock securely yet release if pulled
- Hot-plug enabled for drive swaps without power-down
- Latching connectors prevent accidental disconnects in desktop use
SATAGear SSL-1MSR 40in SATA cable
This SATAGear SSL-1MSR cable connects SATA hard drives, solid-state drives or optical drives to a motherboard or controller. It carries a 6 Gbps signal rate and uses auto-releasable latches on both ends to resist accidental pulls. The 40 inch length suits full-tower chassis or external drive enclosures. Hot-plug operation is supported for drive swaps without a reboot.
Builders who need a secure internal link
The right-angle connector helps route the cable along tight drive cages or behind motherboard trays where a straight plug would foul other components. Latching headers keep the connection firm during vibration or transport. Buyers who require an external eSATA bracket connection should look at a different cable type. Installations that need a shorter run for cable management will find this length excessive.
40 inch straight to right-angle latching SATA cable
The single specification that decides fit is the 40 inch straight-to-right-angle latching layout. Measure the path from your drive bay to the motherboard SATA port; if the distance exceeds this length or a straight-to-straight orientation is required, this part will not work. The 6 Gbps rating matches the SATA 3.0 standard for current mechanical and solid-state drives.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.78
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SSL-1MSR |
Questions about this item
What does the 6 Gbps rate mean once the cable is installed in a system?
The cable supports the SATA 6 Gbps signalling standard, so a connected drive can run at its full SATA III speed without the cable becoming a bottleneck.
Which SATA standard does the interface follow and what does that cap in practice?
It follows the SATA 6 Gbps specification, cabling the link at up to 6 Gbps and working with any SATA revision device through backward compatibility.
What clearance does the straight-to-right-angle design need to fit inside a case?
The right-angle plug sits close to the drive or motherboard header, letting the cable run parallel to the board in tight spaces where a straight connector would foul other components.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0767 6mm Metallic Red Sleeving 1ft
- Red
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





