Shenzhen Lianrui Information Technology
Shenzhen Lianrui Information Technology Mini SAS SFF-8087 to 4 SATA Cable 40CM
Connects a Mini SAS SFF-8087 host port to four SATA drives at 6 Gb/s using 30 AWG flat ribbon cable in 40 cm or 80 cm lengths
- Connector count4
- Product typeComponent Cables
- Product colorBlack
- Overall length40CM/80CM (1.31 ft/2.62 ft)
- Design style1 SATA to 4x SATA
- Connects one Mini-SAS SFF-8087 port to four SATA drives
- Supports 6 Gb/s transmission for SATA I, II, III drives
- 40 cm length fits tight chassis routing
- 30 AWG flat ribbon cable keeps airflow clear
- Compatible with 2.5" and 3.5" SATA hard drives
Mini SAS SFF-8087 breakout cable
The Shenzhen Lianrui Mini SAS SFF-8087 to 4 SATA cable connects a single 36-pin Mini SAS port to four 7-pin SATA drives. It is built for hardware RAID controllers or HBA cards that present SFF-8087 ports. The 40 cm flat ribbon assembly uses 30 AWG wire and supports 6 Gb/s transmission rates. Latching connectors on both ends secure the link in 24/7 operation.
Suits RAID arrays with SFF-8087 controllers
This cable fits builders expanding a hardware RAID set using 2.5" or 3.5" SATA I, II or III hard drives. It will not work for systems that only provide native motherboard SATA ports without a Mini SAS interface. Buyers needing longer reach between controller and backplane should note the 80 cm variant exists but is a separate item. Direct connection to PCIe or U.2 devices is not supported by this breakout design.
36-pin SFF-8087 male host connector
The deciding specification is the single 36-pin Mini SAS SFF-8087 male plug with latch on the host side. Your controller or backplane must present exactly this port type. The four 7-pin SATA female receptacles then attach standard SATA data cables to each drive. Without an SFF-8087 source port the cable cannot be used.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Luxshare |
| Model name | Mini SAS SFF-8087 to 4SATA Cable |
| Product type | Component Cables |
| Product color | Black |
| Design style | 1 SATA to 4x SATA |
| Ports & slots | |
| Connector count | 4 |
| Size & build | |
| Overall length | 40CM/80CM (1.31 ft/2.62 ft) |
Questions about this item
What are the connector types on the Mini SAS SFF-8087 to 4 SATA cable?
The cable has one 36-pin Mini-SAS SFF-8087 male connector with a latch on the host end and four 7-pin SATA female receptacles with latches on the drive end.
How do you install the Mini SAS SFF-8087 to 4 SATA cable correctly?
Connect the single 36-pin Mini-SAS SFF-8087 male end to the motherboard or RAID controller port, then attach each of the four 7-pin SATA female ends to the drives, ensuring every latch clicks securely.
What drive sizes and SATA generations does the 40 cm Mini SAS breakout cable support?
It supports 2.5-inch and 3.5-inch drives using SATA I, II or III interfaces at up to 6 Gb/s through the 30 AWG flat ribbon cable.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





