SMUGDESK 2-in-1 SATA to USB 3.0 & Type-C cable 22Pin 2.5-inch
Connects 2.5-inch SATA drives to USB 3.0 and Type-C ports for fast data transfer
- 2-in-1 USB 3.0 and Type-C connectors fit more devices
- Standard 22Pin SATA interface fits 2.5-inch SATA HDD and SSD drives
- SATA III high-speed transmission accelerates large file backup and transfer
- Plug-and-play design works without extra driver installation
- Lightweight portable build suits outdoor storage and office use
2-in-1 SATA Adapter for 2.5-inch Drives
This adapter cable connects 2.5-inch SATA HDDs and SSDs to devices using either USB 3.0 or Type-C ports. The 22Pin SATA interface provides direct attachment without an enclosure. It suits technicians performing data recovery and users expanding mobile storage.
Replaces Enclosures and Single-Port Cables
The dual-plug design removes the need for separate USB-A and Type-C cables or a bulky hard-drive enclosure. The jump is worthwhile when you regularly move a 2.5-inch drive between legacy USB-A laptops and newer Type-C tablets or phones.
Fits Directly into a Portable Kit
High-purity copper conductors maintain stable power and signal through the 22Pin connector. The cable draws bus power for 2.5-inch drives only; 3.5-inch disks are not supported. No driver installation is required on the host device.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 22Pin SATA connector fit my 2.5-inch drive without an enclosure?
Yes, the 22Pin SATA terminal connects directly to any 2.5-inch SATA HDD or SSD; no separate enclosure or caddy is required.
Do I need to install drivers before using the USB 3.0 or Type-C plugs?
No, the adapter is plug-and-play; simply insert the 22Pin end into the drive and the USB-A or Type-C plug into the host device for immediate recognition.
Can I leave a 3.5-inch drive connected if I add external power later?
The adapter is only compatible with 2.5-inch SATA drives; 3.5-inch disks require an independent power supply and will not work with this cable.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





