SMUGDESK 4PCS SATA Cable Set 6.0Gbps Data & Power Splitter
A four-piece kit supplying SATA 6.0Gbps data cables and Molex-to-dual-SATA power splitters for adding drives
- 4-in-1 kit covers data and power for storage upgrades
- SATA III 6.0Gbps bandwidth enables fast SSD and HDD transfers
- Locking connectors prevent accidental disconnection from chassis vibration
- 4Pin Molex to dual 15Pin SATA splitter adds two power ports
- Flexible sheath allows tidy cable routing inside desktop cases
SATA III 6.0Gbps Data & Power Kit
This four-piece set supplies both SATA 3.0 data cables and 4-pin Molex to dual 15-pin SATA power splitters. The data cables comply with the SATA III specification and deliver up to 6.0Gbps bandwidth for 2.5 and 3.5 inch hard drives, solid-state drives and optical drives. Locking latches on the connectors prevent accidental disconnection caused by chassis vibration. Flexible sheathing keeps internal wiring tidy and installation is plug-and-play with no drivers required.
Desktop Storage Expansion
The kit suits DIY builders and upgraders who need to add SATA drives to a desktop PC that still provides Molex power connectors. It solves the common shortage of SATA power ports by turning one Molex output into two 15-pin SATA power feeds. Systems that lack Molex connectors or that use only non-SATA storage interfaces cannot use these cables.
Locking Latch Connectors
The locking latch design on every SATA connector ensures a tight, secure fit inside the case. This single feature prevents loose contacts and data interruptions when the chassis is moved or vibrated. If your build demands vibration-resistant connections, these cables meet that requirement.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I use the 6.0Gbps data cables or the Molex-to-SATA power splitters for my SSD?
Use both: the SATA 3.0 data cable handles the 6.0Gbps signal link while the 4Pin Molex to 2x15Pin splitter feeds the drive power, so each SSD needs one of each.
What does the 6.0Gbps rating actually deliver when the drive is installed?
The SATA III interface caps the bus at 6.0Gbps; real-world throughput will be lower and depends on the specific SSD or HDD you connect.
Will the 15Pin SATA power plugs work with a standard desktop power supply?
The splitter converts one 4Pin Molex output into two 15Pin SATA power ports, letting you run two drives from a single Molex lead on the PSU.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





