SMUGDESK 50cm 4 SATA 7Pin Host to 4 Target Cable
Connects one SATA host to four target drives at 6Gbps for RAID arrays and server storage
- 6Gbps SATA III speed for fast data access
- One-to-four multi-channel SATA connection expands drive capacity
- 50cm length enables tidy wiring inside server chassis
- Anti-interference design maintains stable RAID array signals
- Data-only cable for server storage and disk array projects
Multi-Channel SATA Cable
This 50cm cable provides a one-to-four SATA 7Pin connection from a single host port to four target drives. It is designed for server storage, industrial systems and hard disk array projects that need multiple drive links from one controller. ||
Data-Only Connection
The cable carries data signals up to the SATA III 6Gbps specification and does not supply power to attached drives. Builders must provide separate power cables for each drive and verify the pin definition matches their controller before installation. ||
Straightforward Internal Routing
The 50cm length fits typical server chassis and storage cabinets without excess slack. Avoid sharp bends or excessive pulling during routing to protect the internal conductors and maintain stable RAID array operation.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 50 cm cable need replacement if the server chassis is deeper than 50 cm?
The cable length is 50 cm; if the host-to-drive distance exceeds that, a longer cable would be required.
What is the maximum sustained data rate the SATA III 6 Gbps interface can maintain?
The cable complies with the SATA III 6 Gbps specification, so sustained throughput is limited to that rate.
Does the anti-interference shielding prevent heat buildup during all-day RAID operation?
The shielding suppresses electromagnetic interference for signal stability; it does not affect thermal performance.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





