SMUGDESK AB01 USB 3.0 to SATA III adapter cable
Connects 2.5-inch and 3.5-inch SATA drives to USB 3.0 for 6Gbps data transfer, drive reuse and backup
- Super Speed 6Gbps transmission via SATA III standard
- Dual drive compatibility for 2.5 and 3.5 inch SATA HDD and SSD
- Plug and play design with no driver installation required
- Reliable tool for data migration, backup and old drive reuse
- Compact lightweight cable for portable outdoor and office use
Universal SATA Drive Adapter
The SMUGDESK AB01 connects standard 2.5-inch and 3.5-inch SATA hard drives or SSDs to a computer through a USB 3.0 port. It is designed for technicians and home users who need to access bare internal drives for recovery, migration or backup without installing them inside a case.
6Gbps SATA III Throughput
The adapter complies with the SATA III standard and delivers up to 6Gbps maximum data transfer speed, which determines how quickly large files move between the drive and the host system. This single bandwidth figure is the key specification for deciding if the cable meets your performance requirements.
Plug-and-Play With Power Caveat
No driver installation is required on mainstream operating systems, so the cable works immediately after connection. The critical limitation is that 3.5-inch mechanical drives need an external power supply to operate, which is not included with the adapter.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What real-world throughput does the 6Gbps SATA III rating deliver when the adapter is connected to a USB 3.0 port?
The adapter supports the SATA III protocol at up to 6Gbps, but actual transfer speed is limited by the USB 3.0 interface and the drive's own performance.
Which USB standard does the adapter use and what practical limit does it impose?
The adapter uses USB 3.0, which caps the maximum data rate below the SATA III 6Gbps ceiling, so the port becomes the bottleneck.
What physical requirements must be met to connect a 3.5-inch mechanical drive?
A 3.5-inch mechanical hard drive requires sufficient external power to operate normally with this adapter.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





