Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a RAID controller to four SAS or SATA drives using a MiniSAS HD SFF8643 host port and SFF8482 29Pin breakout connectors at 12Gbps
This internal HD Mini SAS cable uses an SFF8643 host connector to split into four SFF8482 29pin target ports. It connects a RAID controller or HBA card directly to SAS and SATA hard drives or SSDs inside a server chassis. The forward breakout design is built for enterprise storage expansion in NAS, JBOD and RAID array deployments. Buyers needing a reverse-direction backplane-to-controller cable cannot use this product.
Multilayer shielding reduces signal interference during continuous 24hour operation at up to 12Gbps per-port bandwidth under the SAS 3.0 standard. Firm latching connectors lock securely to prevent loose contact caused by cabinet vibration. The cable supports stable high-throughput reading and writing across all four connected drives. No additional software or drivers are included; the cable is purely a physical interconnect.
Installation requires routing the cable inside a server chassis between the controller card and drive bays, confirming the host card supports SFF8643 forward breakout function beforehand. The rigid shielding and latch mechanism demand adequate clearance for connector engagement. The cable is not designed for external deployment or hot-plug backplane scenarios. Incorrect directionality or unsupported controller firmware will result in undetected drives.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The latching connectors are designed for secure lock-in and long-term enterprise use; no periodic replacement is required under normal server operation.
The per-port 12Gbps bandwidth ceiling of the SAS 3.0 standard is the primary throughput limit during continuous high-speed operation.
The passive shielded wiring produces no noise and negligible heat; it is built for stable 24hour enterprise-grade operation without active cooling.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?