Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects an OCuLink SFF8611 4i port to four SATA drives at 12Gbps using a .5M 32AWG cable with 90-degree connectors for tight server chassis
This cable adapts an OCuLink SFF8611 4i PCIe SAS port to a 90 degree SATA 7pin connector for enterprise hard drives and solid state drives. It supports stable 12Gbps bandwidth for RAID systems in dense backplanes. The .5 meter length fits tight chassis layouts without excess slack. Builders needing longer runs or different connector orientations should choose another cable.
Passive copper conductors carry the signal without active components, so the cable adds no heat or audible noise to the system. The 32AWG low loss wire maintains signal integrity at 12Gbps while drawing no extra power from the host. Professional anti interference shielding reduces crosstalk between adjacent cables in high density installations.
The 90 degree right angle SATA plug directs the cable parallel to the drive, easing internal routing behind backplanes. This geometry prevents sharp bends that can degrade the 32AWG conductors over time. No software, drivers or accessories are bundled with this cable.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Insert the OCuLink SFF8611 4i plug straight into the PCIe SAS port, then route the 90 degree SATA 7P heads along the chassis wall so the right angle bend sits flat against the drive bay, avoiding any sharp kinks in the 32AWG wire.
The SATA 7P connectors are the only moving contacts; repeated drive swaps will degrade their spring fingers long before the 32AWG copper conductors or the OCuLink shell show fatigue.
The 32AWG low loss copper and 0.5 metre length keep insertion loss within the 12Gbps SAS budget, so the first limit under sustained load is the host controller's thermal throttling, not the cable itself.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?