Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PCIe 5.0 breakout cable converts one MCIO 8X 8i port to dual SFF8643 Mini SAS HD connectors for NVMe, SAS and SATA drives at 32Gbps over a 1m low-loss copper harness
The SMUGDESK cable converts a single MCIO 8X 8i port into two independent SFF8643 Mini SAS HD connections. It is designed for administrators and integrators expanding NVMe or SAS storage inside rackmount servers and dense workstations. The 1m harness fits standard chassis routing paths without excess slack.
Premium low-loss copper and optimized shielding keep signal attenuation minimal during continuous heavy I/O. The construction resists crosstalk so bandwidth remains stable across both lanes when driving enterprise RAID controllers or large-capacity NVMe arrays. Performance stays consistent under prolonged workloads rather than only in short bursts.
Upgrading from a PCIe 4.0 or single-lane cable removes the bottleneck that limits modern NVMe SSDs and high-speed SAS drives. The jump is worthwhile when the backplane, controller and drives all support 32Gbps operation and the chassis can accommodate the 1m reach. Builders needing longer runs or different connector types should look elsewhere.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The passive copper harness draws no extra power and produces negligible heat even at continuous 32 Gbps throughput.
A single PCIe 5.0 MCIO 8X 8i receptacle is required on the host side.
Yes, each SFF-8643 port connects directly to standard SAS, SATA or NVMe U.2 backplanes using native SFF-8643 cables.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?