Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a single SFF8654 8i port into two right-angle SFF8087 ports with anti-misplug keying and 32AWG copper for reliable SAS or SATA connectivity
This SMUGDESK cable converts a single PCIe Slimline SAS SFF8654 8i port into two independent SFF8087 ports. It is designed for server and NAS builders who need to connect multiple SAS or SATA drives from one controller slot in space-constrained chassis. The right-angle connectors allow neat routing against backplanes or sidewalls. The .5 metre length keeps internal wiring tidy without excess slack.
Check that your controller or backplane presents a standard SFF8654 8i receptacle with enough surrounding room for the right-angle plug to seat fully. Confirm the target drives or backplanes use SFF8087 connectors and that the short .5 metre reach spans the distance without strain. The built-in anti-misplug keying prevents reverse insertion, but physical access to the latch must still be possible in your specific enclosure layout.
Use this cable when a straight connector fouls adjacent cards or chassis walls, or when a longer harness creates airflow-blocking loops. The right-angle geometry and short 32AWG copper run reduce clutter and improve signal integrity in high-density builds. It is not suited for installations where the controller and drive cages are farther apart than the fixed .5 metre length allows.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The single cable splits one SFF8654 8i port into two SFF8087 ports so both connectors are already attached and nothing extra is required.
The 0.5M length is intended for tight lowprofile chassis; if your drive backplane sits farther from the controller you will need a longer harness.
32AWG lowloss copper with shielding keeps signal integrity stable at high speeds across the short 0.5M run, reducing errors on SAS or SATA drives.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?