SMUGDESK PCIe X1 to 4 X16 USB 3.0 Mining Riser Card
One PCIe X1 slot expands to four PCIe X16 slots via USB 3.0 cables for multi-GPU mining rigs
- Splits one PCIe X1 slot into four X16 outputs
- Gold-plated contacts cut signal loss for stable 24-hour mining
- USB 3.0 cable lets you space cards flexibly inside the frame
- Works in X1/X4/X8/X16 motherboard slots under Windows or Linux
- Circuit design built for continuous 24-hour cryptocurrency mining operation
Four GPU expansion from one slot
This PCIe multiplier turns a single X1 motherboard slot into four independent X16 connectors so multiple graphics cards can run in one mining rig. It targets builders who need more GPU density than the board provides without adding extra motherboards or risers. The adapter works with standard Windows and Linux mining operating systems and accepts X1, X4, X8 or X16 slot sizes.
Gold-plated contacts and USB 3.0 links
Gold-plated terminals cut signal loss and keep connections stable during 24-hour continuous mining sessions. Each X16 output connects through a standard USB 3.0 data cable, letting you space cards flexibly inside the rig frame for better airflow or cable routing. The circuit layout is optimised for non-stop cryptocurrency calculation workloads.
Rig-frame mounting implied by flexible cabling
Because the four outputs reach the motherboard via separate USB 3.0 cables, cards can be secured anywhere the frame allows rather than directly over the slot. This removes the clearance limits of rigid risers and suits open-air mining chassis. Builders who need more than four GPUs per board or who require X16 electrical bandwidth per card cannot use this multiplier.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $21.99
- Typical for this category: the median of 353 items is $21.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the gold-plated contacts on the PCIe X1 to 4 X16 riser need replacement over time?
The gold-plated terminals are designed to resist oxidation and maintain stable signal quality for long-hour mining sessions, so they do not require scheduled replacement under normal use.
What limits the number of GPUs I can run simultaneously on the four PCIe X16 outputs?
The single PCIe X1 upstream link provides the total bandwidth shared across all four slots, so that upstream width is the first bottleneck when multiple GPUs are active.
How much heat does the multiplier board generate during 24-hour continuous mining?
The board itself draws minimal power and produces little heat; thermal load comes almost entirely from the attached GPUs and the USB 3.0 cables carrying data between them.
More in Interface & Card Adapters
Similar items
Fervit M20 Locking IP68 USB 3.1 10Gbps Type-C Female to Female Data Adapter
Silverstone ECD01 USB 2.0 to dual RS232 data adapter
- ATX Mid Tower





