SMUGDESK SATA 3.0 4Pin Female to 22Pin Data Power Cable
Combines data and power in one cable with 4-pin female and SATA 3.0 male inputs to a 22-pin SATA output for SSD and HDD drives
- One cable carries data and power together
- Small 4Pin female plus SATA 3.0 male inputs to 22Pin output
- SATA 3.0 highspeed transfer for SSD and HDD drives
- Flexible cable body for easy routing inside cases
- Reinforced connectors give secure fit to prevent accidental dropoff
All-in-One SATA Data and Power Cable
This SMUGDESK cable combines a small 4-pin female and a SATA 3.0 male input into a single SATA 22-pin (7+15-pin) output. It connects compatible SATA SSDs, HDDs and optical drives inside desktop cases. The integrated design saves internal space and simplifies wiring for hardware modifications or drive expansion projects. Buyers whose devices lack a small 4-pin power source cannot use this cable.
Thermals, Noise and Power Draw
Passive cabling adds no active cooling, fan noise or measurable power draw to the system. The reinforced connector shells maintain a secure fit to prevent signal loss from vibration during normal operation. Flexible cable routing keeps airflow paths clear without restricting case ventilation. No thermal or acoustic specifications apply to this passive component.
What the Bundled Accessories Change
The package contains only the single AB01 combo cable; no additional brackets, adapters or software utilities are supplied. Installation is limited to physical connection between the host interface and the target drive. No driver installation or firmware updates are required for operation. Users needing alternative input connectors or longer lengths must source separate cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the small 4‑pin female and SATA 3.0 male plugs to my power supply and motherboard?
Plug the small 4‑pin female connector into a Molex lead from the power supply and insert the SATA 3.0 male end into a motherboard SATA port; the single 22‑pin (7+15) output then attaches directly to the drive.
Will the flexible cable body or reinforced connectors need periodic replacement?
The cable has no moving parts and the reinforced shells are rated for the life of the build; only replace it if physical damage or connector wear appears.
What speed ceiling appears first when the drive runs sustained transfers?
The link is limited to the SATA 3.0 specification, so the interface itself caps throughput before the cable becomes a bottleneck.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





