SMUGDESK SATA Data Power Combo Cable for 27inch iMac A1312 Mid 2011 Part 5931330 9229875
Replaces the original SATA data and power cable in 27inch iMac A1312 Mid 2011, supporting 3.5inch HDD and 2.5inch SSD upgrades with factory-matched fit
- Direct OEM replacement for 27-inch iMac A1312 Mid 2011 part 5931330
- Combined SATA data and power cable supports 3.5-inch HDD and 2.5-inch SSD
- Factory-matched length and routing installs without cutting or modification
- High-temperature insulation ensures stable SATA 3Gbps transmission in closed chassis
- Restores storage function when original cable is frayed or broken
Direct Replacement Cable
This SATA data and power combo cable is an exact replacement for the 27inch iMac A1312 Mid 2011, matching OEM part numbers 5931330 and 9229875. It integrates both signal and power lines into a single assembly designed for the original internal chassis layout. The factory-matched length and connector positioning allow direct installation without cutting or modification.
Internal Drive Upgraders
Technicians and DIY enthusiasts replacing a failed hard drive cable or upgrading to a 2.5inch SATA SSD in this specific iMac model will find the correct fit and high-temperature insulation suited to the closed chassis. The cable supports the original 3.5inch mechanical drive as well as 2.5inch SATA solid-state drives. Owners of any other iMac model or year cannot use this part, as it is not compatible with different internal layouts or connector configurations.
SATA 3Gbps Transmission
The cable is rated for stable SATA 3Gbps data transmission, which determines the maximum interface speed for the connected storage device. High-temperature resistant insulation maintains signal integrity inside the all-in-one enclosure during long-term operation. Verify that the target drive operates on the SATA interface before installation.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 5931330 cable fit the 27inch iMac A1312 Mid 2011 chassis without trimming?
Yes, the cable length and connector position match the original part so it routes inside the 27inch iMac A1312 Mid 2011 without cutting or modification.
Which step is most often missed when installing the 9229875 combo cable?
Reconnecting the integrated SATA data and power connectors in the correct orientation before reassembling the logic board; the allinone cable must seat fully on both the drive and the motherboard header.
Will the high temperature insulation on the 5931330 cable need replacement during the iMac's life?
The insulation is rated for the closed internal environment of the 27inch iMac A1312 Mid 2011 and does not require scheduled replacement under normal operation.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





