Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects SAS controllers to SATA drives with integrated 15 Pin power for 2.5" and 3.5" drives
This SMUGDESK cable converts an SFF-8482 29-pin SAS connector to a standard 7-pin SATA data port and adds a 15-pin SATA power connection in a single assembly. It lets a SAS controller or backplane drive ordinary SATA hard disks or SSDs without a separate power lead. The integrated design keeps internal wiring tidy in storage servers, NAS units and DIY RAID enclosures.
Installers mixing 2.5" and 3.5" SAS or SATA drives into a SAS-hosted array will find the plug-and-play layout straightforward. Builders whose drives or controllers lack SFF-8482 ports cannot use this cable and need a different interconnect. The product also does not address setups that require power from a source other than the onboard 15-pin SATA connector.
The cable terminates in an SFF-8482 29-pin male SAS plug on one end and splits to a 7-pin SATA data socket plus a 15-pin SATA power socket on the other. If the host side presents that exact 29-pin SAS interface, the cable fits; any other SAS or SCSI connector type will not mate with it.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Insert the 29-pin SAS male end into the controller port, attach the 7-pin SATA data tail to the drive, then seat the 15-pin SATA power connector firmly into the drive’s power socket; the step often missed is fully locking the SAS latch before tightening the chassis side panel.
The 15-pin power plug typically sees more insertion cycles during drive swaps, so its spring contacts fatigue before the 7-pin data header; plan to replace the cable if power pins feel loose or drives intermittently disappear from the array.
The 29-pin SAS to 7-pin SATA conversion is passive, so sustained multi-drive rebuilds or heavy sequential writes will hit the cable’s length and shielding limits before the controller or drives throttle, showing up as CRC errors in SMART logs.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?