Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a RAID controller to four SATA drives with a 3.2 ft SFF-8643 Mini SAS HD cable
This 3.2 Feet cable converts an SFF-8643 Mini SAS HD male port into four SATA data connectors, letting you attach multiple SATA hard drives or SSDs to a single RAID controller. It is built for internal wiring inside servers, NAS units and storage chassis where stable signal transmission matters. The flexible black jacket resists bending stress during assembly and long-term operation. The direct breakout design keeps cable routing tidy in confined equipment spaces.
Ideal for administrators expanding a RAID array using 2.5 or 3.5 SATA hard drives and SATA SSDs. It fits mainstream RAID cards and storage servers that present an SFF-8643 port, providing a reliable link for multi-disk configurations. Builders who require a direct SAS device connection instead of a SATA breakout should choose a different cable type. The fixed 3.2 foot length may also limit layouts that need longer runs between the controller and drive bays.
The single SFF-8643 male plug is the only connector that mates with the RAID controller side; verify your card exposes this exact port before purchase. Four female SATA data receptacles fan out from the splitter, each accepting a standard SATA drive cable. No other interface or protocol is supported by this assembly. Matching the controller port to SFF-8643 is the decisive compatibility check.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Your RAID controller must provide an SFF-8643 Mini SAS HD female port to accept the male connector on this cable.
Yes, each branch uses a standard SATA data connector that mates with any 2.5 or 3.5 SATA HDD or SSD.
The connected drives should appear in your RAID BIOS or operating system without errors and sustain normal read or write activity.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?