Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SlimSAS breakout cable splits one SFF-8654 8i 74Pin port into eight 90° SATA connectors using 30AWG copper for dense server storage expansion
This cable converts a single SFF-8654 8i 74Pin port into eight SATA 7Pin connections. It is built for administrators expanding drive counts inside dense servers or custom workstations. The low-profile design suits small-form-factor and rackmount chassis where space is limited.
The 90-degree right-angle SATA plugs remove the bend radius that straight connectors demand, freeing internal volume and improving airflow. The upgrade is worth it when cable routing blocks ventilation or when drive bays sit too close to the backplane for conventional harnesses.
The fine-gauge wiring carries high-speed SATA signals to eight HDDs or SSDs across a one-metre run. It handles multi-drive RAID arrays and high-capacity NAS builds comfortably, but runs out when the backplane requires a longer reach or a different pinout.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The right-angle SATA connectors sit flush against the drive PCB, so only the cable bend radius behind the connector matters; allow roughly the cable diameter plus a few millimetres for the 30AWG wire to curve without kinking.
The SFF-8654 8i connector is keyed; align the notch on the plug with the slot on the receptacle and press straight in until the latch clicks — forcing it upside-down bends the delicate 30AWG pins.
Replace the cable if any SATA latch breaks, if the 74Pin connector shows bent contacts, or if intermittent drive drops appear on multiple bays simultaneously, indicating conductor fatigue in the 30AWG copper.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?