APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U horizontal rack PDU with 14 NEMA 5-15 outlets and a 7.9 ft input cord for 120 V server cabinets
This 1U horizontal power distribution unit provides 14 NEMA 5-15R outlets for 120V equipment in standard 19-inch racks. It accepts a single NEMA 5-15P input plug on a 7.9 ft cord and supports a 15A maximum input current with a 12A regulatory derated limit. The unit delivers a 1500 VA load capacity for servers, switches and test gear.
The chassis is made of cold-rolled steel with a textured black finish for durability in server rooms and data centres. Pre-installed mounting brackets and included M5 cage nuts and screws allow immediate installation in EIA-310 compliant racks that are 10.1 cm or deeper. Twelve outlets face the rear and four face the front for flexible cable routing.
A large-font metered display shows real-time voltage, current, wattage and power factor so operators can monitor load health at a glance. Self-tripping MOV surge protection with a mechanical trigger cuts power instantly during transients, while a resettable 15A breaker and safety cover prevent accidental resets. This replaces basic unmetered strips when visibility and hardware protection are required.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | 1415B8H-RACK-PDU-SP |
| Product type | Power Distribution Units |
| Design style | Horizontal |
| Power | |
| Supply voltage | 120 V |
| Input current rating | 15A |
| Regulatory derated input current | 12A |
| Input connection | 1 - NEMA 5-15 Power (North America) |
| Voltage output | Nominal Output Voltage: 120 V Maximum Output Voltage: 125 V |
| Output outlets | 14 - NEMA 5-15 Power (North America) |
| Size & build | |
| Rack height | 1U |
| Cord length | 7.9 ft (2.41 m) |
| Product dimensions | 1.7 in × 18.2 in × 3.7 in |
| Product weight | 3.57 lb (1.62 kg) |
| Shipping weight | 2.59 kg |
| Package size | 551 × 185 × 79 mm |
| In the box | |
| Package includes | 1 - Rack-Mount PDU 2 - Mounting Brackets (Pre-Installed) 4 - M5 Cage Nuts 4 - M5 × 12 mm Rack Screws 1 - Product Documentation |
The NEMA 5-15 input plug follows the North American 120 V standard and the regulatory derating limits continuous draw to 12 A, so the 15 A breaker only handles short peaks.
The 1U horizontal PDU fits EIA-310 19-inch racks at least 10.1 cm deep and ships with pre-installed brackets, four M5 cage nuts and four M5x12 mm screws.
Route the 2.4 m NEMA 5-15P cord to the source, secure the PDU with the supplied hardware, then close the safety cover over the 15 A breaker so it cannot be reset by mistake.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?