STARTECH USB3S2ESATA3 eSATA to USB 3.0 adapter cable 3 ft
Connects an eSATA drive to a USB 3.0 port for up to 6 Gbps transfer over a 91.4 cm cable
- Rated speed5 Gbit/s
- Connector count2
- Connector detailsDrive Connectors: 1 - eSATA (7 pin; Data) Female Host Connec
- Cable length0.5 ft (0.15 m)
- Product typeOthers
- Product colorBlack
- Connect eSATA drives via USB 3.0
- Up to 6 Gbps SATA III transfer speeds
- Plug-and-play with no drivers required
- Hot-swap support for drive changes without reboot
- Backward compatible with USB 2.0 and 1.1
Connect eSATA drives via USB 3.0
This 3 ft adapter cable connects an external eSATA hard drive or SSD to a USB 3.0 Type-A port on a laptop or desktop. It uses the ASM1153E chipset to bridge the SATA 6 Gbps interface to the host. The cable is plug-and-play with no driver installation required and supports hot-swap operation for convenient drive changes.
Sustained transfer limited by USB 3.0 bus
Under continuous load the link runs at the USB 3.0 SuperSpeed rate of 5 Gbps, which is lower than the native SATA III 6 Gbps ceiling of the attached drive. UASP is not supported, so command overhead remains at the older BOT protocol level. Performance will drop further when the cable is used with USB 2.0 or USB 1.1 ports.
USB 3.0 port caps drive throughput
The USB 3.0 Type-A connector sets a hard ceiling of 5 Gbps on the connection, preventing the drive from reaching its full SATA III 6 Gbps potential. The adapter does not support port multipliers, so only a single drive can be used at a time. Compatibility extends to legacy USB 2.0 and 1.1 hosts at their respective reduced speeds.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | USB3S2ESATA3 |
| Product type | Others |
| Product color | Black |
| Performance | |
| Rated speed | 5 Gbit/s |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Drive Connectors: 1 - eSATA (7 pin; Data) Female Host Connectors: 1 - USB 3.0 A (9 pin; SuperSpeed) Male |
| Size & build | |
| Overall length | 3 ft (0.91 m) |
| Cable length | 0.5 ft (0.15 m) |
| Shipping weight | 0.08 kg |
| Package size | 208 × 192 × 19 mm |
Questions about this item
Does the USB3S2ESATA3 adapter cable draw much power or get hot when I leave an eSATA drive connected all day?
The cable is a passive adapter with no active electronics that would generate noticeable heat; it simply passes power and data between the USB 3.0 host port and the eSATA drive.
What must my computer already have for the USB3S2ESATA3 to work with an eSATA drive?
A free USB 3.0 Type-A port on the host and an eSATA drive that uses the standard 7-pin data connector; no extra drivers or software are required.
Will the USB3S2ESATA3 still transfer data if I plug it into an older USB 2.0 port on my laptop?
Yes, the adapter is cross-compatible with USB 2.0 and USB 1.1 ports, so it will work at the slower speeds those older ports provide.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Vantec CB-ST00U3 USB 3.0 to SATA Adapter Red 1.8 in
- 1.8 in (4.57 cm)
- SATA





