Supermicro SYS-120C-TN10R 1U barebone server, 10×2.5″ bays
A 1U rackmount barebone with ten 2.5″ hot-swap bays supporting NVMe, SATA and SAS, dual LGA 4189 sockets for Xeon processors and sixteen DDR4 slots up to 6 TB
- ProcessorIntel Xeon
- Graphics processorASPEED AST2600 BMC
- Installed RAMNo Memory Installed
- Form factor1U Rackmount
- Processor socketLGA 4189
- Target workloadGeneral Purpose Server
- Dual-socket capacity with two LGA 4189 Xeon processors
- 16 DDR4 slots support up to 6 TB ECC memory
- Ten 2.5″ hot-swap bays accept NVMe, SATA or SAS drives
- Two PCIe 4.0 x16 FHHL slots plus two M.2 2280 NVMe slots
- Dedicated IPMI LAN and ASPEED AST2600 BMC for remote management
1U dual-socket barebone for storage-heavy workloads
The Supermicro SYS-120C-TN10R is a 1U rackmount barebone that accepts up to two Intel Xeon processors in LGA 4189 sockets. Sixteen DDR4 DIMM slots support ECC memory up to 6 TB when combined with persistent modules. Ten front 2.5-inch hot-swap bays accept NVMe, SATA and SAS drives. Two PCI-E 4.0 x16 full-height half-length slots and two M.2 2280 M-key slots provide expansion. The ASPEED AST2600 BMC handles remote management.
Tool-less drive carriers and standard rail mounting
Drive carriers slide into the front bays without screws and lock with a lever. Processors and memory install from the top after removing the air shrouds. The two PCI-E slots use standard retention brackets. Common issues include forgetting to populate both CPU sockets for full PCI-E lane count, mixing DRAM and persistent memory without following the 8+8 configuration, and exceeding the M.2 length limit of 2280. The dedicated IPMI LAN port must be cabled separately for out-of-band access.
PCI-E 4.0 and SATA 600 set the throughput ceiling
Each PCI-E 4.0 x16 slot delivers up to 32 GT/s per direction, limiting GPU or accelerator bandwidth to that generation. The ten SATA ports run at 600 MB/s, so SATA SSDs cannot exceed that rate. NVMe drives in the front bays share the CPU-attached PCI-E lanes; total NVMe bandwidth depends on the processor model installed. M.2 slots operate at PCI-E 3.0 x2, capping each at roughly 2 GB/s. The ASPEED AST2600 provides only basic 2D video output.
How it compares
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
- Price $1,849.99
- Cheaper than about 68% of the 532 comparable items (median $2,503.49).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | SuperServer |
| Model name | SYS-120C-TN10R |
| Target workload | General Purpose Server |
| Processor | |
| Processor | Intel Xeon |
| Processor socket | LGA 4189 |
| Preinstalled processor | No CPU Installed |
| Max supported CPUs | 2 |
| Chipset | Intel C621A |
| Memory | |
| Installed RAM | No Memory Installed |
| RAM slots | 16 × 288Pin |
| Maximum supported memory | UP to 4 TB: 16x 256 GB DRAM UP to 6 TB: 8x 256 GB DRAM and 8x 512 GB PMem |
| ECC support | Yes |
| Storage | |
| Preinstalled storage | No Storage Installed |
| SATA ports | 10 x SATA 600 |
| SATA and RAID support | RAID 0/1/5/10 |
| Hot-swap drive bays | 10 × 2.5 in hot-swap NVMe/SATA/SAS drive bays (10 × 2.5 in NVMe hybrid) |
| Graphics | |
| Graphics processor | ASPEED AST2600 BMC |
| Ports & slots | |
| PCIe slots | Slot 1: PCI-E 4.0 x16 FHHL Slot 2: PCI-E 4.0 x16 FHHL 2 M.2 NVMe, M-Key, 2280 |
| Front USB ports | 2 x USB 2.0 |
| VGA ports | 1 |
| Rear USB ports | 2 x USB 3.0 |
| Ethernet port | 1 Dedicated IPMI LAN port |
| Size & build | |
| Form factor | 1U Rackmount |
| Product dimensions | 1.7 in × 17.2 in × 23.5 in |
| Product weight | 25 lb (11.3 kg) |
| Shipping weight | 18.14 kg |
| Package size | 823 × 605 × 198 mm |
Questions about this item
How do I verify the ASPEED AST2600 BMC is responding after the initial power-on?
Connect a monitor to the rear VGA port and a keyboard to a USB 2.0 port, then watch for the BMC boot messages and IPMI LAN address on screen.
Which components are included and which must be sourced separately for this barebone?
The chassis, motherboard with Intel C621A chipset, 10 hot-swap 2.5" drive bays, six 4 cm PWM fans, two air shrouds, and the AST2600 BMC are included; CPUs, DDR4 ECC memory, storage drives, and PCIe cards are not.
Which memory configuration should I choose for the 16 DIMM slots — all DRAM or a DRAM and PMem mix?
Populate all 16 slots with 256 GB DDR4-3200 DRAM for up to 4 TB, or use eight 256 GB DRAM plus eight 512 GB PMem modules to reach 6 TB total capacity.
More in Barebone Servers & DIY Kits
Similar items
ASUS RS700A-E11-RS12U-WOCPU044Z 1U rackmount barebone server
- Supports AMD EPYC 7…
- 1U Rackmount
GIGABYTE R184-S90-AAV1 barebone server 1U dual Xeon 6 4-bay Gen5 NVMe/SATA/SAS-4 32 DIMM
- Xeon 6 Processors,…
- 1U Rackmount
ASUS RS501A-E12-RS4U-16TWH barebone server 1U EPYC 9005 24 DDR5 4 NVMe 1600W
ASUS RS500A-E12-RS12U-12W12B 1U barebone server, EPYC 9004, 24 DIMM, 16 NVMe
- Supports AMD EPYC 9…
- 1U Rackmount





