TeKit 4-Pin Molex IDE to 15-Pin SATA Power Adapter Cable .5 ft Black
Connects a SATA power supply to an IDE drive using a .5 ft copper cable with 15-pin male and 4-pin female connectors
- Connector count2
- Connector details4-Pin Molex IDE to 15 Pin Serial ATA SATA
- Connector genderFemale to Male
- Conductor typeCopper Conductor
- Cable length0.5 ft (0.15 m)
- Product type4-Pin Molex IDE to 15 Pin Serial ATA SATA HDD Power Adapter
- Converts legacy Molex power to SATA drives
- 15-pin SATA male connector fits modern hard drives
- 4-pin Molex female end plugs into existing PSU cables
- 20 cm length keeps cable routing tidy inside cases
- Copper conductors deliver reliable power to connected devices
Product identity
The TeKit 4-Pin Molex IDE to 15-Pin SATA Power Adapter Cable converts a legacy Molex power connector into a standard SATA 15-pin plug. It measures 0.5 ft in length and uses copper conductors inside a black thermoplastic jacket. The adapter terminates in one female Molex 4-pin and one male SATA 15-pin connector.
Suitability
This cable suits builders adding a SATA drive to an older power supply that only offers Molex outputs. It also serves repair jobs where a SATA device must draw power from a Molex lead. Buyers who need to power a Molex drive from a SATA connector should look at a reverse adapter instead.
Sustained behaviour
The copper conductors deliver steady current to the attached drive during continuous read or write sessions. The short 0.5 ft run keeps voltage drop low so the SATA device receives stable power over long operating periods. The thermoplastic insulation resists heat from nearby components inside the chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Tekit |
| Product type | 4-Pin Molex IDE to 15 Pin Serial ATA SATA HDD Power Adapter Cable |
| Product color | Black |
| Design style | Cable |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 4-Pin Molex IDE to 15 Pin Serial ATA SATA |
| Connector gender | Female to Male |
| Size & build | |
| Overall length | < 1 in |
| Conductor type | Copper Conductor |
| Cable length | 0.5 ft (0.15 m) |
Questions about this item
Does this cable need a free 4-pin Molex connector from my power supply to work?
Yes, the female 4-pin Molex end plugs into a spare Molex lead from the PSU, supplying power to the SATA device.
Can I keep using an older IDE hard drive or optical drive with this adapter?
The adapter converts a SATA power plug to a Molex socket, so it feeds power to IDE drives, not the other way round.
How do I confirm the adapter is delivering power after I connect it?
The connected SATA drive should spin up and be recognised by the BIOS or operating system once the system is powered on.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





