TeKit 4-Pin Molex to Dual SATA Power Y-Splitter Cable 15cm 2-Pack
A 15 cm Molex-to-dual-SATA power splitter cable, supplied as a two-pack for adding extra drive connections
- Connector count3
- Connector details4-Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive P
- Connector genderMale to Male
- Cable length0.5 ft (0.15 m)
- Product type4-Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive P
- Product colorBlack
- Powers two SATA drives from one Molex connector
- 15 cm cable keeps internal routing tidy
- Two cables included for multiple drive installations
- Male-to-male terminals plug directly into PSU and drives
- Lightweight 21 g design adds minimal mass to build
Power adapter for SATA drives
This two-pack converts a single 4-pin Molex connector into two 15-pin SATA power sockets. Each cable measures 15 cm and weighs 21 g. The male-to-male design adds power outlets for Serial ATA hard drives or optical drives without opening the PSU.
Builders adding SATA power on a Molex-only PSU
Suits anyone expanding storage when the power supply lacks native SATA leads or when all SATA connectors are occupied. Not for systems that already provide enough SATA power ports, nor for installations that need longer cable runs than 15 cm allows.
15 cm Molex-to-dual-SATA splitter length
The fixed 15 cm reach decides whether the cable spans from your PSU to the drive bays. Measure the routing path before purchase; if the distance exceeds this length the adapter will not connect.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | 4-Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive Power Adapter Cable |
| Product color | Black |
| Design style | Cable |
| Ports & slots | |
| Connector count | 3 |
| Connector details | 4-Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive Power Adapter Cable |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | < 1 in |
| Cable length | 0.5 ft (0.15 m) |
Questions about this item
What comes in the 2-pack and do I need any extra cables or adapters to use them?
The pack contains two black 15 cm cables, each with one 4-pin Molex male plug and two SATA 15-pin female connectors. No extra cables are required; plug the Molex end into your PSU and the SATA ends into your drives.
The title says 15 cm but the specs list 0.5 ft — which length should I expect?
Both figures describe the same cable; 0.5 ft is the imperial equivalent of the 15 cm length, so every cable in the pack measures 15 cm from end to end.
Can these splitters safely power two mechanical hard drives from a single Molex connector on my PSU?
Each splitter draws power from one Molex rail and feeds two SATA devices; typical hard drives and SSDs stay well within the current a Molex connection can supply, so two drives per cable is normal use.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





