TeKit IDE 4-pin to 15-pin SATA power cable .5 ft
Converts a legacy 4-pin IDE power connector to a 15-pin SATA power plug in a .5 ft cable
- Connector count2
- Connector detailsIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pi
- Connector genderMale to Male
- Conductor typeCopper Conductor
- Cable length0.5 ft (0.15 m)
- Product typeIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pi
- Powers SATA drives from legacy IDE headers
- 5 ft length keeps cable routing tidy
- Copper conductors deliver reliable current flow
- Male-to-male connectors join directly without adapters
- Black and blue jacket aids quick identification
Power conversion for legacy drives
This cable adapts a standard four-pin IDE power connector to a 15-pin SATA power plug. It lets older power supplies feed current SATA hard drives or solid-state drives without a molex-to-SATA adapter chain. The copper conductors handle the required current for typical drive spin-up and steady operation.
Builders with mixed-generation hardware
The short 0.5 ft length suits cramped drive bays or back-to-back drive cages where slack would block airflow. It is not for users who need to bridge a long distance between a power supply and a distant drive cage, nor for builds that require right-angle connectors to clear a side panel.
Stable delivery under continuous load
Copper conductors and male-to-male terminals maintain consistent voltage while a drive runs sustained read or write workloads. The fixed-length design avoids the resistance added by daisy-chained adapters, so the drive receives clean power during extended transfers or RAID rebuilds.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Tekit |
| Product type | IDE 4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable |
| Product color | Black & Blue |
| Design style | Cable |
| Ports & slots | |
| Connector count | 2 |
| Connector details | IDE 4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | < 1 in |
| Conductor type | Copper Conductor |
| Cable length | 0.5 ft (0.15 m) |
Questions about this item
What power connector must my existing drive or power supply provide for this cable to work?
The cable requires a free 4-pin IDE power connector on the power supply side to deliver power to the SATA device.
Will the .5 ft length reach from a legacy IDE power lead to a SATA drive mounted in a modern case?
At .5 ft the cable is very short, so the IDE power lead and the SATA drive must be close together inside the chassis.
How can I confirm the 15-pin SATA power connection is delivering power after installation?
The SATA drive should spin up and be detected by the BIOS or operating system once the cable is seated on both connectors.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





